Flange bearing 2 holes DODGE F2B-DLEZ-50M-P

DODGE F2B-DLEZ-50M-P is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DLEZ-50M-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DLEZ series Y-bracket with insert bearing is a 2-bolt flange unit that combines an insert ball bearing with a cast iron housing. It is used to support rotating shafts in transmission, conveying and process equipment, where a compact front mounting and simple alignment are required. MR Accesorios Industriales carries this DODGE line in Buenos Aires, Argentina.

The DLEZ series designation is read in blocks: F indicates a 2-bolt flange, B the housing type, DLEZ the insert series with its seals, and the number that follows —20, 25, 30, 35, 40, 45 or 50— identifies the shaft size. The final M indicates the insert locking system onto the shaft, and the P the housing finish or variant. Thus, an F2B-DLEZ-30M-P is a flange bracket for a 30 mm shaft with a DLEZ insert and M locking.

These brackets appear in belt and roller conveyors, mixers, extractors, packaging lines and process lines in food, chemical and materials plants. In Argentina they are found in grinding, dosing and bulk handling equipment, where the 2-bolt flange allows mounting onto sheet metal or structures without machining an additional seat. The cast iron housing absorbs radial loads and a certain axial thrust inherent to operation.

To choose well, take into account the shaft diameter, the type of load and the environmental conditions. The DLEZ insert sealing protects against dust and moisture; if there are frequent washdowns, it is advisable to verify the seal material. Internal clearance and lubrication are already defined by the manufacturer, but mounting requires aligning the flange with the shaft and tightening the insert locking screws evenly so as not to deform the ring. Poor alignment shortens bearing life.

As for equivalences, 2-bolt flange brackets with ball inserts are interchangeable between brands if the mounting dimensions, shaft diameter and locking system match. It is not enough for the series to be similar: you must compare the distance between holes, the center height and the seal type. If you need to replace existing equipment, send us the original part number and we will indicate the compatible alternative from DODGE or from another brand we carry.

MR Accesorios Industriales carries the DODGE line with the backing of more than 80 years in the industry. If you already have the bracket part number —for example F2B-DLEZ-40M-P— or the equipment model, write to us on WhatsApp and we will quote it promptly. We can also advise you on the seal or locking variant that best suits your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.