Flange bearing 2 holes DODGE F2B-DLEZ-115-BEV

DODGE F2B-DLEZ-115-BEV is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DLEZ-115-BEV via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE D-Lok series 2-bolt flange Y-bearing unit is a mounted assembly that combines a cast iron housing with an insert ball bearing, ready to bolt onto a flat surface. It is used to support drive shafts in equipment where rigid, compact mounting is required, with simple alignment and direct mounting onto sheet metal or structure. MR Accesorios Industriales supplies it in Buenos Aires, Argentina.

The D-Lok series designation is read in blocks: the initial F identifies the flange housing type, the 2B indicates the number of holes and the housing format, and DLEZ corresponds to the D-Lok series with its shaft locking system. The number that follows —103, 104, 107, 108 or 115 in the examples F2B-DLEZ-103-BEV, F2B-DLEZ-104-BEV, F2B-DLEZ-107-BEV, F2B-DLEZ-108-BEV and F2B-DLEZ-115-BEV— refers to the shaft diameter for which the insert is assembled, and the BEV suffix defines the sealing variant and housing configuration. With these data each size is identified unambiguously.

These housings appear in belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical, cement and aggregate processing plants. In the Argentine market they are chosen when the shaft runs horizontally and the flange is bolted to a vertical or horizontal face, because they simplify anchoring and absorb combined loads better than a pillow block in tight spaces. They are also used in washing equipment and in dusty areas, where the insert sealing makes the difference.

To select correctly, start from the shaft diameter and the type of load: predominantly radial, moderate axial, or both. The 2-bolt flange housing is aligned with the mounting holes and tightened with screws of adequate grade, without forcing deformation of the housing. The D-Lok insert is locked to the shaft with its locking system and the internal clearance and lubrication specified for each size must be respected. In humid environments or with particles, check the sealing and plan for periodic relubrication.

Among brands, 2-bolt flange housings with insert bearings are interchanged by shaft diameter, number of holes and housing configuration, but the mounting holes and the shaft locking system do not always match. Therefore, before replacing a unit, it is advisable to compare the complete part number and the critical housing dimensions. If the original assembly is not available, a compatible alternative from another line or an equivalent solution within the same design type can be evaluated.

If you have the housing part number at hand, send it by WhatsApp to MR Accesorios Industriales and we'll quote it shortly. If you need a variant you don't see listed, write to us with the model or shaft dimensions and we'll indicate the compatible alternative. We can also review the complete assembly —housing, insert and sealing— so the replacement fits your equipment without surprises.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.