DODGE F2B-DLEZ-012-SHCR flange bearing 2 holes

DODGE F2B-DLEZ-012-SHCR is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-DLEZ-012-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DLEZ series Y-bearing with insert is a 2-bolt flange mounted bearing: the unit combines a ball insert with a housing that is fastened to the frame by means of two bolts. It is used to support rotating shafts in equipment where mounting is on a flat face and the shaft is perpendicular to that surface. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina.

The DLEZ series designation is read in blocks. The F2B prefix indicates the 2-bolt flange configuration; DLEZ identifies the housing family and its sealing system; the middle number refers to the shaft diameter, and the SHCR suffix indicates the insert and locking variant. That is why references such as F2B-DLEZ-012-SHCR, F2B-DLEZ-100-SHCR or F2B-DLEZ-104-SHCR coexist: the shaft size changes, not the logic of the series. Send the complete code to identify the unit.

These supports appear in belt and screw conveyors, mixers, blowers, centrifugal pumps, screens and process lines in food, chemical, cement and aggregate processing. In Argentine plants they are found in washdown areas and in dusty zones, where the insert sealing defines the service life. The 2-bolt flange simplifies mounting on folded sheet metal or profile frames, and allows aligning the shaft without machining a cylindrical seat.

To choose well, check the shaft diameter and the insert locking type, and define the sealing according to the environment: contact, labyrinth or combined. During mounting, rest the flange on a clean, flat surface, tighten the two bolts in a cross pattern and check that the shaft turns freely. Lubricate the insert with the specified grease and check the alignment before starting the machine; a twisted flange shortens bearing life.

Flange mounted units are interchanged between manufacturers by shaft diameter, number of bolts and insert type, but the bolt hole spacing and the pilot diameter change from one brand to another. That is why it is best to compare the complete designation and not just the size. If you need to replace a DODGE unit or look for a compatible alternative, MR Accesorios Industriales will indicate the option that corresponds to your mounting.

Send by WhatsApp the code that appears on the housing or on the equipment plate, for example F2B-DLEZ-015-SHCR, and we will quote it promptly. If the code is worn or unreadable, send a photo of the unit and the shaft measurement: with that we identify the DODGE reference.