DODGE F2B-DL-104-NL flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- D-Lok
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-DL-104-NL is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-DL-104-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE D-Lok series 2-bolt flange Y-bearing unit is an assembled unit that combines a cast iron housing with two mounting holes and a ball bearing with an eccentric locking system. It is used to support rotating shafts in equipment where a compact front mounting and quick installation are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in power transmission.
The D-Lok series designation is read in blocks. In the series codes, F2B indicates a two-bolt flange, DL corresponds to the D-Lok locking system, the middle number is the shaft diameter code and NL indicates that the insert has no lubrication retainer. The examples F2B-DL-014-NL, F2B-DL-015-NL and F2B-DL-100-NL show how the middle number changes according to shaft size, while the overall structure remains the same. To choose the correct code, have the shaft diameter and the type of mounting your machine accepts on hand.
These units are used in belt conveyors, bucket elevators, mixers, blowers and packaging lines. In the Argentine market they appear in food plants, cement plants, cold storage facilities and metalworking shops that need to replace worn units without modifying the existing structure. The two-bolt flange allows mounting on sheet metal or cast iron with simple front alignment, and the eccentric-locking insert makes adjustment on the shaft easy without special tools.
To select, check that the shaft diameter matches the code and that the flange has room for the two mounting holes. The insert seal protects against dust and moisture; if the environment is aggressive, it is advisable to check the condition of the seals and renew the lubrication. During installation, align the flange with the shaft and tighten the locking screw to the recommended torque. Slight misalignment generates axial load and shortens bearing life, so it is advisable to check with a straightedge or dial indicator before start-up.
DODGE D-Lok series units are interchangeable with other 2-bolt flange Y-bearing lines that use eccentric-locking inserts, as long as the shaft diameter, hole spacing and center height match. When requesting a quote, send the full code and, if possible, a photo of the old part: that way we can tell you the compatible alternative or, if needed, we quote it to measure. MR Accesorios Industriales also supplies bearings, seals and lubricants to complete the replacement.
If you are unsure which code fits your equipment, message us on WhatsApp with the model or the shaft and flange dimensions. We'll send you a quote shortly and tell you the alternative that best suits your application.
Dimensions
- Número de producto
- 058625
- Bore
- 1-1/4 in
Frequently Asked Questions
- What does the NL suffix mean on DODGE D-Lok units?
- The NL suffix indicates that the insert has no lubrication retainer. It is a variant used when the equipment already has its own lubrication system or when the environment does not require that additional protection. To choose, take into account the working conditions and the type of maintenance you apply.
- How do I know which D-Lok unit code I need?
- You need the shaft diameter and the flange type. The F2B-DL code includes a middle number that identifies the size; for example, F2B-DL-012-NL corresponds to a specific diameter. Send us that data on WhatsApp and we'll send you a quote for the exact reference.
- Can this unit replace one from another brand?
- Yes, if the shaft diameter, flange hole spacing and center height match. Y-bearing units with eccentric locking from different brands are often interchangeable. Send us the code or a photo of the original part and we'll tell you the compatible alternative.