Flange bearing 2 holes DODGE F28-PSEZ-50M-P

DODGE F28-PSEZ-50M-P is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F28-PSEZ-50M-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE PSEZ series Y-bearing housing with insert bearing is a two-bolt flange unit designed to support rotating shafts in power transmission equipment. It combines the housing and the bearing in a single piece, which simplifies mounting on chassis, frames and sheet metal structures. It is used in conveyors, fans, mixers and agricultural machinery, where firm fastening and a shaft that rotates with controlled alignment are required.

The PSEZ series designation is read in blocks: the initial letter F identifies the housing type, the number that follows indicates the size, PSEZ corresponds to the two-bolt flange housing family, the number before the M indicates the shaft diameter and the final M refers to the insert locking system on the shaft. A specific example is F28-PSEZ-50M-P, where each segment provides a size or configuration detail. To interpret a particular reference, it is best to read it in full and check it with the exact part number.

These housings appear in the food, cement, aggregates, chemical and agricultural industries, and in plants in Buenos Aires and the interior. They are found in belt and chain conveyors, bucket elevators, screens, mixers, blowers and water treatment equipment. The two-bolt flange allows them to be mounted on flat faces or tensioners, and the insert bearing absorbs radial loads and a certain axial thrust inherent to operation. In applications with dust or moisture, the appropriate sealing is chosen for each case.

To select correctly, you must check the diameter and type of insert locking, the sealing, the lubrication and the flange alignment. The housing must sit flat on the structure, with the bolts tightened in a cross pattern so as not to deform the housing. The insert is fixed to the shaft with the set screws or the corresponding locking system, and it is advisable to verify the clearance and the condition of the grease before starting up the equipment. A slight misalignment is corrected during mounting; a large misalignment shortens the bearing life.

As for equivalences, two-bolt flange housings with insert bearings are interchangeable between manufacturers by shaft diameter, housing type and locking system, not by the commercial part number. Each brand uses its own nomenclature, so one manufacturer's reference does not literally match another's. If you need to replace a unit, send us the old part number, the shaft diameter and a photo of the mounting: we will indicate the compatible alternative from DODGE or from another line we carry.

MR Accesorios Industriales carries DODGE as an official brand and adds more than 80 years of experience in bearings, housings and power transmission. If you have the part number F28-PSEZ-50M-P or any other reference from the PSEZ series, send it by WhatsApp along with the shaft diameter and the working conditions. We will quote it promptly and, if necessary, indicate the compatible alternative or manufacture it to measure.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.