Timing pulley DODGE F14MX-168S-20-F

DODGE F14MX-168S-20-F is a timing pulley reference, within Power transmission. Request a quote for F14MX-168S-20-F via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE HT500 series timing pulley is a power transmission component designed to work with 14MX profile timing belts. It is used to transmit motion between shafts synchronously, without slipping, in equipment where the speed ratio must remain constant. It is a key part in machines that require precision, such as pumps, fans, compressors and conveyors. MR Accesorios Industriales supplies it in Buenos Aires, Argentina, with more than 80 years of experience in the field.

The designation of these pulleys is read in blocks. The prefix F indicates that it is a flanged pulley; 14MX corresponds to the timing belt pitch; the number that follows, such as 168 or 180, indicates the number of teeth on the pulley; the S identifies the hub or bushing type; 20 is the pulley width in millimeters; and the final F confirms the flange type. Thus, a code such as F14MX-168S-20-F describes a pulley with 168 teeth, 20 mm wide, for a 14MX pitch belt. The HT500 series groups these configurations.

These pulleys are used in industries in Argentina such as food, chemical, petrochemical and metallurgical. They are present in screw compressors, process pumps, centrifugal fans, belt conveyors and machine tools. Their function is to maintain synchrony between the drive shaft and the driven shaft, which is critical in processes where a speed variation affects product quality or line safety. They are also used in bottling and packaging equipment, where timing must be exact.

To select a timing pulley, you must take into account the belt pitch, the number of teeth, the width, the shaft diameter and the bushing type. Installation requires perfectly aligning the pulleys to avoid irregular belt wear and noise. Lubrication does not apply in this type of drive, but it is essential to check belt tension and the condition of the teeth. Proper sealing of the bushing protects against dust and moisture. At MR Accesorios Industriales we advise you so you choose the right pulley for your application.

DODGE HT500 timing pulleys are interchangeable with other brands that use the same 14MX belt profile and a similar number of teeth and width. Compatibility depends on the bushing dimensions and the shaft diameter. When replacing a pulley, always compare the complete code and the critical measurements. If you need an alternative, we can indicate the option compatible with your equipment. We work with the exact designation shown on your machine or drawing.

To request a quote for your DODGE HT500 timing pulley, send us on WhatsApp the complete code, for example F14MX-168S-20-F, or the model shown on your equipment. With that data we send you the quote promptly. If you cannot find the variant you are looking for, write to us with the code or the measurements and we will help you identify it. At MR Accesorios Industriales we resolve your inquiry directly and technically.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.