Synchronous drive DODGE DYNA-SYNC

DODGE DYNA-SYNC is a synchronous drive reference, within Power transmission. Request a quote for DYNA-SYNC via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DYNA-SYNC timing belt is a power transmission component that works by engagement between its teeth and the toothed pulleys, without slipping. It is used where it is necessary to maintain the exact transmission ratio between shafts, synchronize movements or position precisely. MR Accesorios Industriales sells it in Buenos Aires, Argentina, and quotes it according to the size you need.

DYNA-SYNC is the designation of the DODGE line of timing belts. Like any series of this type, it is identified by its pitch, its number of teeth and its width: those three data define the length and the transmission capacity. Therefore, when ordering a DYNA-SYNC it is advisable to provide the complete part number or, if you don't have it at hand, the pitch size, the number of teeth and the width. With that data the belt that goes on your equipment is identified without ambiguity.

These belts appear in machines where synchronism is critical: compressors, pumps, fans, conveyors, mixers and process equipment. Also in the food, chemical, cement industries and in water treatment plants, where moderate speeds are combined with the need to maintain the phase between shafts. In Argentina they are found in imported equipment and in production lines that demand repeatability in positioning.

To select a DYNA-SYNC take into account the pitch and the tooth profile, which must match the pulley; the width, which defines the transmissible power; and the number of teeth, which sets the center distance. During assembly, verify the alignment of the pulleys, the correct tension and that there are no damaged teeth or wear on the flanks. Excessive tension accelerates wear on the shaft bearings; low tension produces tooth jumping.

Timing belts are interchanged between brands by equivalence of pitch, profile and number of teeth, not by the commercial part number. If the equipment comes with a DYNA-SYNC and you need to replace it, the safest thing is to compare those three variables against the original belt. When the pitch and profile match, the belt from another brand can work, but it is advisable to confirm the width and the tooth type before mounting.

If you have the part number or size of your DYNA-SYNC belt, send it via WhatsApp to MR Accesorios Industriales and we will quote you shortly. If you can't find the variant you are looking for, write to us with the equipment model or a photo of the belt and we will identify it together.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.