Flange bearing 2 holes DODGE AN-GTM-08-107-D

DODGE AN-GTM-08-107-D is a flange bearing 2 holes reference, within Bearing housings. Request a quote for AN-GTM-08-107-D via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTM series Y-bearing with insert is a 2-bolt flange mounted unit that combines an insert ball bearing with a cast iron housing. It is used to support rotating shafts in equipment where the mounting must be compact and allow front-face installation. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, with technical advice to select the correct size.

The AN-GTM-#-D designation is read in parts: AN identifies the mounted bearing housing family, GTM is the 2-bolt flange series with insert bearing, the middle number indicates the shaft size and the suffix -D corresponds to the housing configuration. For example, AN-GTM-05-012-D and AN-GTM-06-100-D share the series but change the shaft diameter; AN-GTM-10-111-D and AN-GTM-10-112-D show that the same shaft size can have different mounting variants.

These housings are used in conveyors, mixers, blowers, centrifugal pumps, bottling equipment and packaging lines. In Argentine industry they appear in food, chemical, cement and aggregate processing plants, where a 2-bolt flange is needed to fasten to a wall or structure and an insert bearing that allows some initial misalignment.

To select the correct housing, take into account the shaft diameter, the insert locking type (set screw or eccentric), the sealing required for the environment (dust, moisture, washdowns) and the expected radial and axial load. During mounting, check the flange alignment, tighten the insert locking screws with the proper wrench and lubricate according to the duty cycle. Poor alignment accelerates wear on the seal and the insert.

Equivalences between mounted bearing housing brands are established by the dimension standard and by the shaft diameter, not by the commercial part number. When requesting a quote, it is advisable to provide the complete part number, the shaft diameter and the working conditions so that MR Accesorios Industriales can indicate the compatible alternative within the DODGE line or other brands it sells.

If you need to replace a 2-bolt flange Y-bearing housing, send the AN-GTM-... part number by WhatsApp to MR Accesorios Industriales. We will quote the exact reference or the equivalent option and advise you on mounting and lubrication. With more than 80 years in the Argentine industrial market, we reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.