Insert bearing DODGE AN-GT-09-45M-CR

DODGE AN-GT-09-45M-CR is a insert bearing reference, within Bearings. Request a quote for AN-GT-09-45M-CR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GT series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or foot units. It is used where a shaft needs to rotate with moderate radial load and some misalignment, with the advantage of being able to replace the insert without changing the housing. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the correct code.

The GT series designation is read in blocks: the prefix AN-GT identifies the insert family, the number following it indicates the shaft diameter and the suffix M indicates the locking type on the shaft. In the examples AN-GT-04-20M-CR, AN-GT-05-25M-CR and AN-GT-06-30M-CR you can see how the shaft size changes while the rest of the code remains the same. The suffix CR corresponds to the contact seal version, which retains grease and blocks dust.

These inserts are mounted in conveying and process equipment: belt conveyors, bucket elevators, mixers, screens, fans and centrifugal pumps. In the Argentine market they appear in food, cement, aggregate and water treatment plants and in the oilseed industry, where the environment usually has dust, moisture or frequent washdowns. The insert plus split plummer block housing combination allows the shaft to be removed without moving the entire assembly.

To select correctly, take into account the shaft diameter, the locking type and the sealing. Locking by set screws or by eccentric collar defines the ease of mounting and the resistance to rotation on the shaft. The CR sealing is advisable in dirty environments; in applications with a lot of water or pressure washing, it is advisable to evaluate an additional labyrinth. Before mounting, verify the alignment of the housing and lubricate with grease compatible with the load and working temperature.

Regarding equivalents, DODGE GT series inserts interchange with other insert bearing lines in metric and inch sizes, as long as the shaft diameter, inner ring width and locking system match. It is not enough for the shaft number to be the same: the insert geometry and the housing bore must be compared. If you have doubts, send us the complete code and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE brand and manufactures split plummer block housings, ANSI chains and pulleys. If you need to replace an insert or assemble the complete assembly, send the AN-GT code on WhatsApp and we will quote it shortly. We can also advise you on the appropriate housing for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.