Piloted flange bearing DODGE AN-GT-09-110-D

DODGE AN-GT-09-110-D is a piloted flange bearing reference, within Bearing housings. Request a quote for AN-GT-09-110-D via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE AN-GT housing is a piloted flange mounted bearing unit with an insert bearing, designed to secure rotating shafts to metal structures or masonry. The flange centers the assembly in the housing and the holes allow anchoring with bolts. It is used in equipment where a shaft must be supported with radial load and some thrust, with simple alignment and accessible maintenance. MR Accesorios Industriales sells this line as an official brand.

The GT series designation is read in blocks: the initial letters identify the housing family, the two-digit number indicates the insert bearing size and the final suffix defines configuration or sealing variants. For example, AN-GT-09-110-D combines the AN prefix, the GT series, size 09 and code 110 with a D ending. This scheme lets you order the exact replacement just by reading the tag on the old housing.

These housings appear in belt conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In food, chemical and aggregate plants in Argentina they are chosen for the piloted flange, which simplifies mounting on folded sheet metal or profile frames. They are also used in water treatment equipment and agricultural machinery, where dust and moisture demand reliable sealing.

To select correctly, check the shaft diameter, the pilot diameter and the distance between flange holes. Check the sealing: in dusty or wet environments a reinforced seal is advisable. When mounting, seat the flange flat, tighten the bolts in a cross pattern and check alignment with the drive shaft. Lubricate according to the duty cycle and check axial clearance before start-up.

Insert bearings and mounted housings are interchanged between brands by shaft number and housing type, but the center height, pilot and hole locations vary between lines. Do not replace by shaft diameter alone: also compare the flange and the shaft locking system. If the original part number is not at hand, send us a photo of the part and the main dimensions.

If you need the AN-GT for a machine that is down, message us on WhatsApp with the full part number or the machine model. At MR Accesorios Industriales we will quote the DODGE housing and, if applicable, point you to the compatible alternative from our in-house manufacturing line. We can also advise you on the right insert, sealing and lubrication for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.