Pillow block bearing DODGE AN-GT-05-014-D

DODGE AN-GT-05-014-D is a pillow block bearing reference, within Bearing housings. Request a quote for AN-GT-05-014-D via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GT series Y-bearing pillow block is a foot-mounted unit: the cast iron housing and the ball bearing come assembled from the factory, with the insert already secured to the shaft by set screws. It is used to support rotating shafts in conveyors, fans, belts and process equipment, where simple two-bolt mounting and quick alignment are required. MR Accesorios Industriales sells this line as an official brand.

The GT series designation is read in blocks: AN-GT identifies the family of pillow blocks with insert bearing, the number that follows indicates the housing size and the final suffix distinguishes sealing or configuration variants. For example, AN-GT-04-012-D and AN-GT-05-014-D share the same logic: the size and the associated insert code change. In AN-GT-06-103-D or AN-GT-07-106-D a larger shaft diameter already appears. To choose correctly, the governing data is the complete part number, not just the housing number.

These pillow blocks appear in food and beverage plants, water treatment plants, cement plants, sugar mills and agro-industrial facilities in Argentina. They are seen on belt and chain conveyors, bucket elevators, mixers, blowers and packaging lines. The advantage of the mounted unit is that it simplifies assembly: there is no need to assemble the housing with the bearing separately, and the insert accommodates minor misalignments typical of welded structures or sheet metal frames.

To select, start from the shaft diameter and the type of load: predominantly radial in horizontal conveyors, with some axial on inclined shafts. Check the sealing according to the environment: dust, wash water or fine chips require labyrinth seals or oil seals in good condition. During assembly, seat the pillow block on a flat, rigid base, tighten the mounting bolts without deforming the housing and verify that the shaft turns by hand before starting up. The insert lubrication comes from the factory; subsequent regreasing is done through the housing channel.

As for interchangeability, pillow blocks with insert bearing are available from several brands under their own designations. Equivalence is not defined by shaft diameter alone: bolt hole spacing, center height, insert mounting type and sealing must be compared. So if you are coming from another brand, send us the old part number and the main dimensions; we will indicate the compatible alternative from the DODGE line or the option that best suits your equipment.

If you need to replace a Y-bearing pillow block, write to us on WhatsApp with the complete part number, for example AN-GT-05-100-D or AN-GT-06-102-D. At MR Accesorios Industriales we quote you shortly and, if you are looking for a variant that does not appear, we handle it with the part number or model you have on hand. We can also advise you on assembly and lubrication so that the unit runs aligned and lasts as long as it should.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.