Gearbox DODGE 449951RCW

DODGE 449951RCW is a gearbox reference, within Power transmission. Request a quote for 449951RCW via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE G series reducer is a power transmission unit that reduces rotation speed and multiplies torque in industrial drives. It is mounted between the motor and the driven machine to adapt revolutions and effort to what the process requires. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct configuration for your application.

The designation of these reducers combines a basic six-digit number with the RCW suffix, as in 449674RCW or 449681RCW. The number identifies the mounting configuration and ratio within the series, and the RCW suffix distinguishes the shaft and housing variant. The G series is organized into the G525, G700, G920 and G700HR3 families, which arrange sizes and capacities. To get a quote, send us the complete part number as it appears on the nameplate or drawing.

These reducers are used in Argentine industries such as food, chemical, water treatment, cement and material handling. They appear in conveyor belts, mixers, agitators, positive displacement pumps and bucket elevators. Also in drives for mills, presses and process equipment where high torque at reduced speed is required. The robust housing and flange or foot mounting make them suitable for continuous service in plant.

To select the reducer, take into account the motor power, the input speed, the reduction ratio and the torque required at the output shaft. Verify the service factor according to the type of load and the daily working hours. During mounting, take care with the alignment between the reducer and the motor, and between the reducer and the driven machine. Correct lubrication and adequate sealing prevent leaks and premature wear. Follow the manufacturer's instructions for tightening and start-up.

DODGE reducers are interchangeable with other brands of similar mounting, but the exact equivalence depends on the ratio, torque and the dimensions of shaft and flange. Matching the nominal power is not enough: you must compare the mounting arrangement, the diameter and length of the shafts, and the position of the holes. If you need to replace existing equipment, send us the part number and the application characteristics so we can indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line with more than 80 years of experience in industrial distribution. If you are looking for a reducer from the G series, message us on WhatsApp with part number 449674RCW or the one you need. We will quote it promptly and help you define the right configuration for your drive.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.