DODGE 28H100-MPB timing pulley

DODGE 28H100-MPB is a reference of timing pulley, within Power transmission. Request a quote for 28H100-MPB via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE MPB timing pulley is a power transmission component used with timing belts to achieve an exact rotation ratio between shafts. It is used in equipment where synchronization is critical, such as machine tools, industrial printers, conveyors and positioning systems. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and helps you choose the right pulley according to the pitch, belt width and pitch diameter your application requires.

The designation of these pulleys combines the pitch diameter in tenths of an inch with the belt width and the MPB suffix. For example, 14H100-MPB indicates a pitch diameter of 1.4 inches and a belt width of 1.00 inch; 16H300-MPB corresponds to 1.6 inches in diameter and 3.00 inches in width. The letter H identifies the 0.375 inch (3/8") pitch, and the numbers after the H indicate the belt width in hundredths of an inch. The MPB suffix distinguishes the mounting version with taper bushing or pilot bore, depending on the model.

In Argentine industry, these pulleys appear in packaging lines, textile machines, printing equipment, precision conveyors and pump and compressor drive systems. They are also used in the food sector, where synchronization prevents offsets in dosing and cutting, and in maintenance workshops that replace pulleys worn by use or misalignment. The H100 series is the narrowest and the H300 the one with the highest torque capacity, which makes it possible to cover everything from light drives to applications with moderate loads.

To select the right pulley, take into account the belt pitch, the number of teeth, the pitch diameter and the width. Verify that the bore or taper bushing matches the shaft diameter and that the fastening system is suitable for the load. During assembly, align the pulleys precisely to avoid irregular belt wear and noise. Lubrication does not apply to this type of drive, but it is advisable to check belt tension and the condition of the teeth. If the pulley works in a dusty or humid environment, consider additional protection.

DODGE MPB timing pulleys can be interchanged with other brands that follow the same pitch and width standard, as long as the number of teeth, the pitch diameter and the mounting type match. It is not enough for the part number to be similar: the critical dimensions and the fastening system must be verified. At MR Accesorios Industriales we tell you the compatible alternative if you send us the part number of the original pulley or the shaft and belt measurements.

If you need a DODGE MPB timing pulley, write to us on WhatsApp with the full part number or with the data of your drive: pitch, number of teeth, belt width and shaft diameter. We will quote you promptly and advise you so that the pulley works correctly with your belt and your equipment. MR Accesorios Industriales accompanies Argentine industry with power transmission components.