Radial shaft seal DBH 9995Pol — 48.00 x 68.00 x 7.00

DBH 9995Pol is a radial shaft seal reference, within Seals. Request a quote for 9995Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9995Pol oil seal is a radial seal with a 48 mm shaft diameter, 68 mm housing and 7 mm height, with Lx-R H design. It is used to retain lubricant and exclude contaminants on shafts that rotate inside a housing. It is a wear part: when oil loss appears, dust enters or a bearing is changed, it should be replaced. At MR Accesorios Industriales we carry it as an official brand and advise you so you request the correct seal.

This item is a DBH radial shaft seal, identified with the designation 9995Pol. Its dimensions are 48 mm shaft diameter (d), 68 mm housing diameter (D) and 7.00 mm height (h). The indicated design is Lx-R H, which corresponds to a retaining lip with spring and a defined mounting configuration. These are the data shown in the manufacturer's data sheet and the ones you must cross-check before ordering it. If your shaft or housing does not match those values, do not force the installation: look for the nearby size.

Typical applications of a seal of this size are in equipment with rotating shafts: gearboxes, pumps, electric motors, rollers and belt or chain drives. It also appears in machine tools and in process equipment where oil must be separated from the environment. In all those cases it performs two functions at the same time: it retains the lubricant on the inner side and blocks the entry of dust, water or particles on the outer side.

To install it, verify that the shaft is clean, free of burrs and wear marks in the contact area, and that the housing has no dents. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and do it with a flat pusher so as not to deform it. The selection depends on the shaft diameter, the housing and the available height, as well as the working speed and temperature. If those data are not clear, it is advisable to inspect the assembly before defining the replacement.

If you need an equivalent or a nearby size, send us the code 9995Pol together with the shaft and housing dimensions, a photo of the old part and the equipment where it is mounted. With that we can locate the alternative within the DBH line or suggest a seal from another series that performs the same function. You do not need to have the technical data sheet at hand: the machining data is enough to guide the search.

At MR Accesorios Industriales we carry the DBH brand as an official brand and add more than 80 years of experience in bearings, power transmission and seals. If this seal is the one you are looking for, or if you want us to review a nearby size, write to us on WhatsApp with the code 9995Pol and we will send you the quote.