Radial shaft seal DBH 9964 — 57.19 x 76.20 x 9.52

DBH 9964 is a radial shaft seal reference, within Seals. Request a quote for 9964 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9964 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 57.19 mm shaft diameter, 76.20 mm housing and 9.52 mm height make it suitable for equipment where axial space is limited. Design Lx indicates a single-lip configuration with a spring, suitable for moderate speed and low pressure applications. MR Accesorios Industriales carries this official brand so you can replace worn seals with a reliable alternative.

The DBH 9964 is a radial lip seal with the following dimensions: shaft diameter 57.19 mm, housing diameter 76.20 mm and height 9.52 mm. Its Lx design corresponds to a single-lip seal with a steel spring, intended for rotating shafts where the goal is to contain oil or grease and prevent the entry of dust. The designation 9964 identifies this specific size within the DBH line, and it is essential to verify that the housing and shaft match these values before replacing.

This type of seal is used in gearboxes, pumps, electric motors, transmission shafts and process equipment. It is commonly found in applications where the shaft rotates at medium speeds and the differential pressure is low, such as bearings lubricated with oil or grease. It is also used in agricultural and industrial machinery operating in environments with dust or moisture, where the lip must maintain sealing through prolonged cycles.

To correctly select a seal, take into account the shaft diameter, the housing diameter and the available width. The Lx design requires a shaft surface with suitable hardness and roughness to avoid premature lip wear. During mounting, lubricate the lip with the same oil or grease as the equipment, insert the seal perpendicular to the shaft and verify that the spring is correctly seated. Avoid striking the seal with tools that could damage the lip.

If you need an equivalent seal or a nearby size, you can send us the part number 9964 or the dimensions of your current seal. At MR Accesorios Industriales we check the data against the manufacturer's product page to offer you a compatible alternative. We can also advise you if the mounting space requires a different design or if the shaft shows wear and a repair sleeve should be evaluated.

To request a quote for the DBH 9964 oil seal or ask about other sizes, write to us by WhatsApp and mention the part number 9964. Our technical team will reply with the information you need to move forward with your maintenance.