Radial shaft seal DBH 9960Vit — 41.00 x 74.00 x 11.00/18.50

DBH 9960Vit is a radial shaft seal reference, within Seals. Request a quote for 9960Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9960Vit radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its A 308 Bidi design combines two lips, one primary and one secondary, which improve sealing in applications with dust or moisture. With dimensions of 41 mm shaft, 74 mm housing and a height of 11.00/18.50 mm, it suits gearboxes, pumps and reducers that require a reliable barrier against leaks.

This DBH 9960Vit oil seal has a shaft diameter of 41 mm, a housing diameter of 74 mm and a height of 11.00/18.50 mm. The A 308 Bidi design indicates a double-lip configuration, intended to improve sealing in environments with particles. The primary lip retains the oil while the secondary one acts as a wiper, protecting the sealing area. It is a replacement part for equipment that demands higher sealing than a single-lip seal.

Typical applications for this oil seal include gearboxes, water or oil pumps, speed reducers and electric motors. In general, it is used on rotating shafts where there is a risk of dust, water or chips entering. It also appears in power transmission equipment and in agricultural or industrial machinery operating under demanding conditions. Its double lip makes it suitable for highly contaminated environments, where a conventional seal could fail prematurely.

To install this oil seal, verify that the shaft measures 41 mm and the housing 74 mm, with a housing width that accommodates the height of 11.00/18.50 mm. The shaft surface must be free of burrs and have adequate hardness to prevent premature wear. Lubricate the lip before installation and make sure the seal enters perpendicular to the shaft. If the equipment runs at high speeds or temperatures, consult us to confirm material compatibility.

If you need an equivalent oil seal or a nearby size, the most practical approach is to send us the part number 9960Vit or the current dimensions of the seal to be replaced. You can also send us a photo of the part and the housing. At MR Accesorios Industriales we review alternatives within the DBH line and other brands we supply. The same part number is not always necessary: sometimes a nearby standard size performs the function just as effectively.

To request a quote for the DBH 9960Vit oil seal, write to us on WhatsApp and send us the part number 9960Vit or the dimensions 41 x 74 x 11.00/18.50 mm. We will reply with the quote and purchase options. If you have doubts about installation or want to confirm whether this model is the right one for your equipment, our technical team can advise you. At MR Accesorios Industriales we work with seals and oil seals so your machine keeps running without leaks.