Radial shaft seal DBH 9954Pol — 41.00 x 62.00 x 12.00

DBH 9954Pol is a radial shaft seal reference, within Seals. Request a quote for 9954Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9954Pol oil seal is a single-lip radial shaft seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. With a 41 mm shaft diameter, 62 mm housing diameter and 12 mm height, it corresponds to designation A 106. It is used in gearboxes, pumps, electric motors and power transmission equipment that rotate at moderate speed and need a reliable, low-maintenance barrier.

This DBH 9954Pol oil seal has a shaft diameter of 41 mm, a housing diameter of 62 mm and a height of 12.00 mm. Its A 106 design corresponds to a single-lip radial shaft seal with a spring, intended for rotating shafts with oil or grease lubrication. The flexible lip rests on the shaft and creates the dynamic seal, while the outer body holds the part firmly inside the housing. It is a common size in medium-sized industrial equipment.

Typical applications for this oil seal include gearboxes, reducers, centrifugal pumps, electric motors, compressors and transmission rollers. In all these cases it performs the same function: preventing lubricant from escaping to the outside and keeping contamination from entering the shaft or the bearings. It is also found in process equipment, conveyors and agricultural machinery where the shaft rotates continuously and sealing tightness is critical to component service life.

To install it correctly, check that the shaft and housing diameters match the values on the product page, that the shaft has no burrs or wear, and that the housing is clean and free of deformation. Lubricate the lip before inserting it and install the seal with a support tube that presses on the outer edge, never on the lip. If the shaft shows a worn track, consider a nearby size or a seal with the lip in a different position to avoid repeating the failure.

If you need an equivalent or a close size, send us the code stamped on the old seal, the shaft and housing dimensions, and a photo of the part. With that data we review alternatives within the DBH line or other brands we carry. We can also advise you if the original seal has a special design, such as a double lip or a lip with a dust guard, so that the replacement is the correct one.

To request a quote for the DBH 9954Pol oil seal or ask about a similar size, send the code 9954Pol by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best fit your equipment. We work with in-house manufacturing so you can find the part you need without hassle.