Radial shaft seal DBH 9928 — 32.00 x 45.00 x 16.00

DBH 9928 is a radial shaft seal reference, within Seals. Request a quote for 9928 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9928 radial shaft seal is a lip seal that closes off the passage of lubricant and blocks the entry of dust and water on rotating shafts. It is press-fitted into the housing and works on the shaft with an oil film that renews the sealing. It is a wear part: when lubricant loss appears or dirt enters, it is replaced. MR Accesorios Industriales carries this brand and helps you identify the correct size.

This item is a DBH 9928 radial shaft seal, with the following dimensions: shaft diameter 32 mm, housing diameter 45 mm and height 16.00 mm. The indicated design is A 053, which corresponds to the lip and metal body geometry. These are the values you need to compare before mounting: the seal fits by interference in the housing and the lip rests on the shaft. If the shaft is worn or the housing has burrs, the seal will not seal properly even if the size matches.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where there is a shaft rotating inside an oil-filled crankcase. It also appears in applications exposed to dust or water, where the seal serves a dual function: it retains lubricant and prevents the entry of contaminants. It is commonly found in continuous process equipment, where a leak forces the line to stop. That is why it is advisable to check the condition of the lip and the shaft at each preventive maintenance.

To select the seal, verify that the shaft diameter, housing diameter and height match those of the DBH 9928. The A 053 design defines the lip profile and the type of body; if the original has a different geometry, consult us before replacing. During mounting, lubricate the lip with the same oil as the equipment, insert it perpendicular to the shaft and use a tube or press that rests on the outer edge, never on the lip. If the shaft shows wear, consider a repair sleeve or an alternative size.

If you cannot find the code 9928 or need a neighboring size, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With that data we look for the equivalent in DBH or another brand we carry. We can also guide you if the A 053 design is not available and a replacement with another lip geometry needs to be evaluated. The more complete the information, the faster we can give you a useful answer.

To request a quote for the DBH 9928 oil seal, write to us on WhatsApp and send us the code 9928 or the dimensions 32 x 45 x 16 mm. MR Accesorios Industriales carries this brand and has more than 80 years of experience in bearings, power transmission and seals. If the seal goes inside an assembly, tell us what equipment it works in and we will help you check whether the associated bearing or bushing also needs to be replaced.