Radial shaft seal DBH 9924Vit — 14.00 x 26.00 x 7.00

DBH 9924Vit is a radial shaft seal reference, within Seals. Request a quote for 9924Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9924Vit radial shaft seal is a lip seal that mounts on a 14 mm shaft and seals against a 26 mm housing, with a height of 7 mm. Its function is to retain lubricant inside the assembly and block the entry of dust, water or particles that could damage bearings and bushings. It is a wear part that should be checked at every teardown and replaced when it shows stiffness, cuts or loss of elasticity.

This item is a seal from the DBH line, identified with the code 9924Vit. Its dimensions are 14 mm shaft, 26 mm housing and 7.00 mm height, and it corresponds to the Lx-R H design. That combination of diameters and height places it in the range of small seals, typical of light transmission shafts, small pumps and mechanisms with limited space. The Lx-R H design defines the geometry of the lip and the metal body, and it is what must be matched when looking for a replacement.

The most common applications of a seal of this size appear in small gearboxes, low-power electric motors, water pumps and transmission equipment where the shaft rotates inside a fixed housing. It is also used in machine tools, packaging equipment and light conveying. In all cases it performs the same function: separate the lubricated side from the environment, prevent leaks and extend the life of the bearings and bushings behind the seal.

For proper installation, check that the shaft has no burrs or wear in the contact area and that the housing is clean and free of dents. Lubricate the lip before inserting it and press the part straight, without tilting it, until it seats at the bottom. If the shaft has a marked groove, it is advisable to evaluate a neighboring size or a design with an auxiliary lip. Selection depends on speed, temperature and the type of lubricant, data that should be on hand when consulting.

If you need an equivalent or a close size, send us the code 9924Vit along with the shaft, housing and height dimensions, and the brand of the equipment where it is mounted. With that data we can locate the part in the DBH line or propose a compatible alternative. A photo of the old seal and the seat also helps. The more complete the information, the faster we can confirm the correct option for your machine.

At MR Accesorios Industriales we carry the DBH brand and have more than 80 years of experience in the field. If this seal is for a running machine, write to us on WhatsApp with the code 9924Vit and the dimensions, and we will send you a quote. We can also advise you if you need to change the design or adjust the selection according to the working conditions.