Radial shaft seal DBH 9895 — 38.00 x 62.00 x 7.00

DBH 9895 is a radial shaft seal reference, within Seals. Request a quote for 9895 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9895 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 38 mm shaft diameter, 62 mm housing and 7 mm height make it suitable for gearboxes, pumps and medium-sized electric motors. The Mz design combines a sealing lip with a secondary exclusion lip, which improves protection in dusty or dirty environments. MR Accesorios Industriales carries this official brand and advises you on choosing the correct seal for your application.

This item is a radial shaft seal from the DBH brand, identified with the code 9895. Its standard dimensions are: shaft diameter 38 mm, housing diameter 62 mm and height 7.00 mm. The Mz design corresponds to a seal with a main sealing lip and a secondary exclusion lip, mounted on a metal body with an outer coating. This configuration is common in applications where oil or grease must be contained while also preventing the entry of dust, water or particles. The exclusion lip runs without contact or with light contact depending on the case, and complements the action of the main lip.

Typical applications for a seal of these dimensions include gearboxes, speed reducers, centrifugal pumps, electric motors, transmission shafts and power transmission equipment in general. It is also found in agricultural machinery, material handling equipment and industrial process lines. In all cases, the seal serves to close the passage of lubricant to the outside and prevent external agents from entering the sealed cavity, extending the service life of bearings and gears.

To correctly select this seal, verify that the shaft diameter is within the tolerance recommended for radial seals, that the housing has adequate depth for the 7.00 mm height and that the shaft surface has hardness and roughness compatible with the lip. During installation, lubricate the lip with the same oil or grease used in the application, avoid striking it and make sure the spring is correctly positioned. If the shaft shows wear, consider a nearby size or a seal with an offset lip.

If you need a seal equivalent to the DBH 9895 or a close size, the most practical approach is to send us the code, a photo of the part and the dimensions measured with a caliper. With that data we can confirm alternatives in other brands or series, always respecting the shaft, housing and height dimensions. We can also guide you if the Mz design is not the most suitable for your equipment and another type of lip or material should be considered.

To request a quote for the DBH 9895 seal or inquire about an equivalent size, send us the code on WhatsApp to MR Accesorios Industriales. We will reply with the technical information you need to make your purchase decision.