Radial shaft seal DBH 9882Vit — 45.00 x 63.00 x 7.00

DBH 9882Vit is a radial shaft seal reference, within Seals. Request a quote for 9882Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9882Vit radial shaft seal is a lip seal mounted in the housing of a fixed component that seals against a rotating shaft. Its function is to retain the lubricant inside the assembly and block the entry of dust, water or particles that accelerate wear. With dimensions of 45 mm shaft, 63 mm housing and 7 mm height, and an Lx-R H design, it is a common replacement part in pumps, electric motors and gearboxes.

The DBH 9882Vit is a radial-type seal with a sealing lip and Lx-R H design. Its standardized dimensions are 45 mm shaft diameter, 63 mm housing diameter and 7.00 mm height. The 9882Vit designation identifies the size and construction type within the DBH line. This format with a lip and steel spring is the most widespread for rotating shafts, because it maintains constant contact against the shaft and compensates for small eccentricities.

Typical applications for this seal include centrifugal pumps, electric motors, gearboxes, compressors and transmission equipment. In all these cases, the seal separates the oil or grease from the outside environment and prevents leaks that dirty the machine and force lubricant replenishment. It also protects bearings and gears from contamination with dust or chips, which extends the service life of the assembly.

To install a seal, check that the shaft is clean, free of burrs or marks, and lubricate the lip before inserting it. Pressure must be applied to the outer ring, never to the lip. It is key to check the condition of the shaft: if it shows wear or grooves, the new seal will not seal properly. Selection is made by the three dimensions — shaft, housing and height — and by the design type, which defines the retention direction and environmental resistance.

If you need a nearby size or an equivalent, send us the code 9882Vit along with the shaft, housing and height dimensions. The code stamped on the old seal or a photo of the part also works. With that data we look for the option available in the DBH line or in another brand we supply, always respecting the mounting dimensions. The seal does not need to be in good condition: it is enough that the dimensions are legible.

MR Accesorios Industriales supplies the DBH brand as part of its seals and oil seals line. If this seal is for a machine in operation, message us on WhatsApp with the code 9882Vit and the dimensions. We send you the quote and confirm the alternative that best fits your application.