DBH 9827Pol radial shaft seal — 32 x 52 x 9

DBH 9827Pol is a reference of radial shaft seal, within Seals. Request a quote for 9827Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9827Pol radial shaft seal is a lip seal designed for rotating shafts with a 32 mm diameter, a 52 mm housing and a 9 mm height. Its function is to retain lubricant inside the assembly and block the entry of dust, water or particles, protecting bearings and bushings in equipment with rotating motion. It is a wear part: when the lip hardens, crystallizes or loses elasticity, it starts to seep oil and should be replaced before the bearing fails.

This item is a seal with an Lx-R AH design, with the dimensions indicated in its designation: shaft diameter 32 mm, housing diameter 52 mm and height 9.00 mm. The AH suffix corresponds to a configuration with an auxiliary or exclusion lip, intended for environments where dirt is present. DBH is a brand that MR carries, so the code 9827Pol is identified as such.

Typical applications for a seal of this size are gearboxes, centrifugal pumps, electric motors, mixers and transmission equipment where a 32 mm shaft rotates inside a 52 mm housing. It is also used in industrial washing machines, compressors and machine tools. In all cases it works alongside a bearing or bushing, and its service life is tied to the speed, temperature and type of lubricant in the assembly.

To install it, check that the shaft has no burrs or deep marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and install the seal with a support tube that presses on the outer diameter, never on the lip. If the shaft shows wear, consider a seal with the lip in a different position so the failure is not repeated.

If you need an equivalent, send us the full code, the shaft, housing and height dimensions, and a photo of the old seal if possible. With that data we check alternatives within the same category or subcategory or from another brand that MR carries. The code does not have to match: it is enough that the three dimensions and the design type match.

To request a quote for the DBH 9827Pol seal, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the quote and the alternatives we have in the seals and oil seals line.