Radial shaft seal DBH 9805 — 32.00 x 39.00 x 8.00

DBH 9805 is a radial shaft seal reference, within Seals. Request a quote for 9805 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9805 seal is a single-lip radial seal mounted on rotating shafts to retain lubricant and block the ingress of dust, water or particles. With dimensions of 32 mm shaft, 39 mm housing and 8 mm height, and A 305 design, it is a common replacement part in gearboxes, pumps and electric motors. MR Accesorios Industriales carries it as part of its line of seals and oil seals for industrial maintenance.

This DBH 9805 seal has a shaft diameter of 32 mm, a housing diameter of 39 mm and a height of 8.00 mm. Its A 305 design corresponds to a radial shaft seal with a sealing lip and metal case, designed for rotating shafts with oil or grease lubrication. The 9805 nomenclature identifies the size within the DBH line. It is a wear part that is replaced when lubricant loss or contaminant ingress appears.

It is used in equipment where a shaft rotates inside a fixed housing: gearboxes, centrifugal pumps, electric motors, reducers and transmissions. Also in applications exposed to dust or splashes, where the lip prevents lubricant from escaping and water or dirt from entering the bearing or bushing. It is commonly found in plant, factory and agricultural or road equipment maintenance.

To install it, verify that the shaft has no burrs or wear and that the housing is clean and free of dents. Lubricate the lip with the same grease or oil as the equipment before inserting it, and place the seal perpendicular to the shaft, without tilting it. If the shaft shows a marked groove, evaluate a nearby size or a seal with the lip in another position. The selection depends on speed, temperature and type of lubricant.

If you need an equivalent or a close size, send us code 9805 or the shaft, housing and height dimensions along with a photo of the old seal. We can also look for alternatives in other brands or with a different lip design. The more data you give us — equipment, position and type of lubricant — the more accurate the proposal. MR Accesorios Industriales has more than 80 years in the industry and advises you so you don't buy twice.

To request a quote for the DBH 9805 seal, write to us on WhatsApp with the code and quantity. We will confirm alternatives with no obligation. If you are unsure about the size, send the shaft and housing dimensions and we will verify together.