Radial shaft seal DBH 9727 — 38.10 x 50.30 x 11.10

DBH 9727 is a radial shaft seal reference, within Seals. Request a quote for 9727 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9727 seal is a single-lip radial shaft seal that is mounted on the shaft and inside the housing to retain lubricant and block the entry of dust, water or particles. Its Kx design and standardized dimensions make it suitable for rotating equipment where space is limited and a reliable closure is needed. MR Accesorios Industriales supplies this brand and advises you so you can choose the correct seal for your application.

This item is a DBH radial shaft seal identified with the code 9727. Its dimensions are: shaft diameter 38.10 mm, housing diameter 50.30 mm and height 11.10 mm. The Kx design corresponds to a sealing lip with a spring that ensures constant contact on the shaft. These dimensions and the type of construction are the data you must verify before replacing a seal in pumps, motors, gearboxes or bearings.

Radial shaft seals such as the DBH 9727 are used in equipment where there is a rotating shaft passing through a housing and the lubricant must be separated from the environment. Typical applications: centrifugal pumps, electric motors, gearboxes, mixers, conveyors and agricultural or industrial machinery. They are also used in bearings of split plummer block housings and in transmission cases, as long as the shaft and housing have the indicated dimensions.

To install this seal, check that the shaft is clean, without burrs or marks, and that the housing is not deformed. Lubricate the lip with the same grease or oil used in the equipment before inserting it. The Kx design works well at moderate peripheral speeds and requires a shaft surface with adequate hardness and roughness. If the shaft shows wear, consider a repair sleeve or a nearby size before forcing the seal.

If you need an equivalent or a close size, send us the code 9727 or the dimensions of your original seal (shaft, housing and height). With that data we search the DBH line or other compatible alternatives. We can also offer you the same type of seal in another size if your shaft or housing has been reground. You do not need to have the manufacturer's data sheet: the dimensions are enough to identify the replacement.

To request a quote for the DBH 9727 seal or ask about a nearby size, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best fit your equipment. If you have doubts about assembly or design, our technical team can guide you so the repair goes right the first time.