DBH 9694Pol radial shaft seal — 37 x 60 x 12/30

DBH 9694Pol is a reference of radial shaft seal, within Seals. Request a quote for 9694Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9694Pol radial shaft seal is a design A 289-R seal fitted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 37 mm shaft, 60 mm housing and 12/30 mm height place it in power transmission equipment and industrial machinery where axial space is limited. MR Accesorios Industriales supplies this brand and advises you on choosing the right seal for your application.

This item is a DBH radial shaft seal identified as 9694Pol, with the following dimensions: shaft diameter 37 mm, housing diameter 60 mm and height 12.00/30.00 mm. The A 289-R design defines the lip profile and the type of case, intended for rotating shafts with permanent lubrication. The dual height 12/30 mm indicates that the seal has a 12 mm body and an additional 30 mm section, which allows it to cover different housing depths without changing the diameter. Always verify these dimensions against your equipment drawing before installation.

Seals of this size are used in gearboxes, pumps, electric motors, transmission shafts and continuous process equipment. They also appear in agricultural machinery, conveyors and hydraulic systems where oil or grease must be contained and external contamination kept out. As a wear component, it should be checked at every preventive maintenance interval: an incipient leak or a hardened lip anticipates failure. If the equipment runs with high vibration or temperature, choose a suitable lip compound and check compatibility with the fluid.

To select the correct seal, compare the shaft diameter, housing diameter and height with the original part. Shaft tolerance and surface finish affect sealing performance: a scratched shaft or one with oval wear accelerates leakage. During installation, lubricate the lip, use an insertion tool that does not damage it and check that the seal sits square. If the housing has burrs or the shaft has play, correct it before installing. MR Accesorios Industriales can advise you on the A 289-R design and its variants.

If you need an equivalent, send us the code 9694Pol or the dimensions 37 x 60 x 12/30 mm via WhatsApp. You can also send a photo of the old seal, the housing drawing or the designation marked on the part. With that data we review alternatives within the DBH line and other brands we supply, and confirm the option that fits best.

MR Accesorios Industriales supplies the DBH brand as part of its seals and radial shaft seals line. If your equipment stopped due to a leak, do not force the seal: ask first. Write to us on WhatsApp with the code 9694Pol and we will reply with the technical information you need to decide.