DBH 9682Pol radial shaft seal — 58 x 102 x 12

DBH 9682Pol is a reference of radial shaft seal, within Seals. Request a quote for 9682Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9682Pol radial shaft seal is a lip seal that is mounted on the shaft and closes against the housing to retain lubricant and stop the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and power transmission equipment where there is a rotating shaft coming out of a lubricated body. MR Accesorios Industriales carries this brand and helps you confirm the size before quoting.

This seal has a shaft diameter of 58 mm, a housing diameter of 102 mm and a height of 12.00 mm. The A 184-R design corresponds to the construction geometry of the seal: a sealing lip with a spring and an outer body that fits into the housing. It is a radial-section seal, designed for shafts that rotate within a moderate speed range and with permanent lubrication. The 9682Pol designation is the reference you will need to order it or look for an equivalent.

Typical applications for a seal of this size appear in gearboxes, speed reducers, centrifugal pumps, electric motors, mixers and belt or chain transmission equipment. In all those cases the seal serves two functions: preventing oil or grease from escaping through the shaft passage and preventing contaminants from entering from outside. It is also used as a secondary closure on bearings and housings that work in dusty or humid environments.

To mount it properly, verify that the shaft has no burrs or marks that could cut the lip, lubricate the seal before inserting it and apply force on the outer ring, never on the lip. The housing must be clean and free of deformation. If the shaft has play or is worn in the contact area, the seal will not seal even if the size is correct. When selecting, take into account the rotation speed, the working temperature and the type of lubricant: that determines whether the lip material is the right one.

To quote the 9682Pol part number, send us the full designation, the shaft, housing and height dimensions, and a photo of the old seal if you have one. With that data we look for the equivalent in the same brand or in another line we carry. We can also guide you if the seal is mounted on equipment for which no drawing is available: many times the housing and shaft dimensions are enough to identify the part.

To get a quote for the DBH 9682Pol oil seal, write to us by WhatsApp and send us the part number. At MR Accesorios Industriales we work with seals and oil seals for maintenance and replacement, and we confirm alternatives without hassle. If the seal is part of a larger assembly, tell us what equipment you are repairing and we'll let you know if anything else is needed.