DBH 9677Vit radial shaft seal — 33 x 43 x 6

DBH 9677Vit is a reference of radial shaft seal, within Seals. Request a quote for 9677Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9677Vit radial shaft seal is a lip seal that stops oil or grease at the point where a shaft passes through a housing. With a 33 mm shaft diameter, 43 mm housing diameter and 6 mm height, and design A 156-R, it is used in gearboxes, pumps, electric motors and power transmission equipment to retain lubricant and keep out dust and water. MR Accesorios Industriales sells this brand and quotes it by WhatsApp.

This item is a DBH 9677Vit radial shaft seal, identified by the designation code 9677Vit. Its dimensions are 33.00 mm shaft diameter, 43.00 mm housing diameter and 6.00 mm height, and it corresponds to design A 156-R. It is a lip seal with a metal case and elastomer that is press-fitted into the housing, with its lip resting on the rotating shaft. Design A 156-R defines the lip and case geometry for that size range.

Typical applications for a seal of these dimensions are found in gearboxes, reducers, centrifugal pumps, electric motors, compressors and power transmission equipment. In all of these cases it performs the same function: keeping lubricant inside the assembly and preventing contaminants such as dust, chips or water from entering. It is also used on fan, mixer and conveyor shafts, where the seal works alongside bearings and bushings.

To select it correctly, check that the shaft diameter, housing diameter and height match the dimensions of the original part. Check the condition of the shaft surface: wear or a groove in the lip contact area causes leaks even if the seal is new. During installation, lubricate the lip, seat the seal perpendicular to the shaft and tap on the outer edge with a suitable tube or driver, never on the lip. If the shaft is damaged, consider a wear sleeve.

To quote the 9677Vit code, send us the shaft, housing and height dimensions along with a photo of the old seal. With that data we look for the equivalent in DBH or in another brand we sell. We can also check design A 156-R against the manufacturer's data sheet to confirm that the lip and case geometry is the right one for your equipment.

MR Accesorios Industriales sells seals and oil seals in different brands and sizes. If you want a quote for the DBH 9677Vit or ask about an equivalent, write to us on WhatsApp with the code and dimensions. We will reply with the corresponding reference and replacement options.