Radial shaft seal DBH 9672Vit — 35.00 x 47.00 x 5.60

DBH 9672Vit is a radial shaft seal reference, within Seals. Request a quote for 9672Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9672Vit radial shaft seal is a lip seal that closes off the passage of oil or grease at the point where a shaft rotates inside a housing. Its function is to retain the lubricant inside the mechanism and block the entry of dust, water or particles that accelerate wear. It is used in gearboxes, pumps, electric motors and transmission equipment, among other applications where there is rotary motion and a need for sealing.

This DBH 9672Vit seal has 35.00 mm shaft diameter, 47.00 mm housing diameter and 5.60 mm height. The design indicated on the product page is A 156-R, which corresponds to a single-lip radial shaft seal with a retaining spring. Those three dimensions define whether the seal fits the housing and seats properly on the shaft, so it is advisable to verify them before ordering.

Seals of this size are found in equipment where a 35 mm shaft rotates inside a machined housing: gearboxes, centrifugal pumps, electric motors, compressors, mixers and belt or chain drives. They also appear in machine tools, industrial washing equipment and conveying systems. In all cases they serve the same function: separating the lubricated side from the outside environment.

To install it, check that the shaft has no burrs or marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and do so with a flat pusher to avoid twisting it. If the shaft shows wear, consider a nearby size or a repair sleeve. The selection depends on speed, temperature and the fluid to be retained.

If you need a seal equivalent to the 9672Vit, send us the full code, the shaft, housing and height dimensions, and a photo or sample of the old seal. With that data we look for the alternative within the lines we carry or a nearby size that fits the same housing. We can also advise you if the A 156-R design is not the one that corresponds to your equipment.

To request a quote for the DBH 9672Vit seal or ask about a similar size, send the code by WhatsApp to MR Accesorios Industriales. If you have doubts about the designation, the series or the material, attach an image of the seal and the dimensions taken with a caliper. That way we will reply with the option that best fits your machine.