DBH 9620 radial shaft seal — 29 x 36 x 8

DBH 9620 is a reference of radial shaft seal, within Seals. Request a quote for 9620 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9620 radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and exclude contaminants. Its dimensions of 29 mm shaft diameter, 36 mm housing diameter and 8.00 mm height place it in the range of compact seals for power transmission equipment and light machinery. MR Accesorios Industriales carries this brand and advises you so you choose the right seal for your application.

This item is a radial shaft seal from the DBH line, identified by the code 9620. Its standard dimensions are 29 mm for the shaft diameter (d), 36 mm for the housing diameter (D) and 8.00 mm overall height (h). The Ms design corresponds to a single lip configuration with a spring, intended for rotating shafts with permanent lubrication. The 9620 designation groups these dimensions and that design, so any technical inquiry must start from those three values.

Seals of this size are used in small gearboxes, electric motors, centrifugal pumps, compressors and power transmission equipment. They also appear on fan, mixer and conveyor shafts where oil or grease must be contained and dust or water kept out. Being a compact size, it is common in equipment where radial space is limited and reliable sealing is needed without adding bulk to the assembly.

To select the right seal, check that the shaft and housing diameters match the values on the product page. The shaft surface must be ground and free of burrs; a deep scratch or eccentric wear ruins the lip within a few hours. The housing must be clean and free of deformation. During installation, lubricate the lip with the same grease or oil used in the equipment and use a support tube so as not to damage it. If the shaft rotates at high speed, confirm that the lip material is compatible with the working temperature.

To quote a seal equivalent to the 9620, send us the full code, the shaft, housing and height dimensions, and a photo of the old seal if you have it on hand. With that data we look for alternatives within the same DBH line or from other brands we carry. We can also advise you if the Ms design is not suitable for your application and a different lip type or material is needed.

MR Accesorios Industriales carries the DBH brand. If you want a quote for the 9620 seal, write to us on WhatsApp with the code and the dimensions. We will reply with the options that best fit your equipment.