Radial shaft seal DBH 9608Vit — 88.00 x 108.00 x 10.00

DBH 9608Vit is a radial shaft seal reference, within Seals. Request a quote for 9608Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9608Vit radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to contain lubricant and block the entry of dust, water or particles. Its Lx-R-AH design combines a sealing lip with a metal reinforcement that gives it rigidity and keeps it centered. It is used in gearboxes, pumps, electric motors and power transmission equipment where bearings and gears must be protected. MR Accesorios Industriales supplies it as part of its line of seals and oil seals.

This item is a DBH radial shaft seal identified by the code 9608Vit. Its dimensions are 88.00 mm shaft diameter, 108.00 mm housing bore diameter and 10.00 mm height. The Lx-R-AH design corresponds to a seal with a sealing lip, a reinforced body and a geometry designed to retain lubricant in one direction. The lip runs against the shaft with slight radial pressure, while the outer diameter rests in the housing to prevent rotation and leakage around the outside.

Typical applications for this seal appear in equipment with rotating shafts where oil or grease must be separated from the environment. It is found in gearboxes, centrifugal pumps, electric motors, reducers and machine tools. It is also used in power transmission equipment, such as housings and bearings, where the seal protects the raceway and extends the service life of the assembly. In all cases, selection depends on shaft speed, temperature and the type of lubricant.

To install a radial shaft seal, check that the shaft has no burrs or marks that could damage the lip, and that the housing is clean and free of deformation. The seal is inserted with a suitable tool, applying uniform pressure on the outer diameter, never on the lip. Before fitting it, lubricate the lip with the same oil or grease it will retain. If the shaft shows wear, consider a nearby size or a seal with an auxiliary lip. Correct alignment between shaft and housing is key to preventing premature leaks.

If you need a seal equivalent to the 9608Vit or a nearby size, send us the code, the shaft, housing bore and height dimensions, and a photo of the old seal if you have one. With that data we can look for an alternative within the DBH line or other brands we supply. We can also advise you on the most suitable design according to the type of lubricant and the working speed. The more precise the information, the faster we find the part you need.

To request a quote for the DBH 9608Vit seal or ask about a similar size, write to us on WhatsApp and send us the code. At MR Accesorios Industriales we handle technical inquiries and help you identify the correct seal for your equipment. You can also send us the shaft and housing dimensions if you do not have the code at hand. We are here to advise you on the selection and installation of industrial seals and oil seals.