Product page
Radial shaft seal DBH 9587Vit — 15.00 x 26.00 x 5.00
- Manufacturer Part Number
- 9587Vit
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 9587Vit is a radial shaft seal reference, within Seals. Request a quote for 9587Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 9587Vit radial shaft seal is a lip seal that closes off the passage of oil, grease or contaminants between a rotating shaft and its housing. With 15 mm shaft diameter, 26 mm housing and 5 mm height, and Mx design, it is press-fitted into crankcases, covers and gear reducer boxes. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.
This item is a radial shaft seal from the DBH line, identified as 9587Vit. Its dimensions are 15 mm shaft diameter (d), 26 mm housing diameter (D) and 5.00 mm height (h). The Mx design corresponds to the construction geometry of the seal: a sealing lip with spring and a metal body that fits the housing. It is a replacement part for small-diameter shafts where axial space is limited.
It is used in applications where lubricant must be retained and dust or water kept out: small electric motors, pumps, gear reducers, fan shafts, machine tools and transmission equipment. It also appears in gearboxes and mechanisms with 15 mm shafts, where the seal runs on a ground surface with a stable oil film.
To install it, verify that the shaft has the right dimensions and finish, free of burrs or marks, and that the housing is clean and free of deformation. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, with a tube or press that presses on the outer edge. If the shaft has play or is pitted, the seal will not retain even if the dimensions match.
If you cannot find the part number 9587Vit or you need a nearby size, send us the shaft, housing and height dimensions, the design type and a photo of the old seal. With that data we look for the equivalent in DBH or another brand we carry. We can also advise you on whether the seal should have a spring or not, depending on the use.
MR Accesorios Industriales carries the DBH brand and has more than 80 years in the industry. To request a quote for this seal or ask about a similar size, write to us on WhatsApp with the part number 9587Vit and the dimensions. We reply promptly with the alternative that best fits your equipment.
Dimensions
- Shaft (d)
- 15mm
- Housing bore (D)
- 26mm
- Height (h)
- 5.00mm
- Design
- Mx
Frequently Asked Questions
- What are the dimensions of the DBH 9587Vit seal?
- The DBH 9587Vit seal has 15 mm shaft diameter, 26 mm housing diameter and 5.00 mm height. These are the dimensions shown in the designation and it is best to verify them with a caliper before ordering, because a seal with a different height may not fit the housing.
- What type of application is this seal suitable for?
- It is suitable for sealing small-diameter rotating shafts in motors, pumps, gear reducers and mechanisms where oil or grease must be retained and contaminants kept out. The Mx design and the 5 mm height make it suitable for reduced axial spaces.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with the part number 9587Vit and the shaft, housing and height dimensions. If it is not available, send us a photo of the old seal and the dimensions taken with a caliper so we can look for the equivalent in DBH or in another brand we carry.