Radial shaft seal DBH 9586Pol — 18.40 x 26.40 x 3.60

DBH 9586Pol is a radial shaft seal reference, within Seals. Request a quote for 9586Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9586Pol radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the ingress of contaminants, such as dust or water, in equipment with rotating motion. It is installed in the housing and its lip rests on the shaft, creating a reliable dynamic seal. It is a key component in pumps, electric motors, gear reducers and machinery in general, where correct sealing extends the service life of bearings and gears.

This DBH 9586Pol seal has a shaft diameter of 18.4 mm, a housing diameter of 26.4 mm and a height of 3.60 mm. Its Mx design corresponds to a standard single-lip configuration with spring, suitable for applications where differential pressure is low and peripheral speed is moderate. The lip elastomer is formulated to resist oils and greases commonly used in industry. The metal case ensures a firm fit in the housing and facilitates installation with suitable tools.

Typical applications of this seal include small centrifugal pumps, low-power electric motors, gearboxes, compressors, fans and transmission equipment. It is also used in machine tools, material handling equipment and light hydraulic systems. In all cases, its function is to protect bearings and gears from the ingress of particles and from lubricant loss, which reduces wear and prevents premature failures.

To correctly select this seal, verify that the shaft and housing dimensions match those of the equipment. The shaft surface must be free of burrs, scratches or excessive wear; otherwise, the lip will not seal properly. During installation, lubricate the lip with the same oil or grease used in the equipment and use an installation tube that presses on the case, never on the lip. Avoid striking the seal and make sure it sits perpendicular to the shaft.

If you need a seal with nearby dimensions or an equivalent from another brand, contact us. We can look for alternatives with the same shaft and housing diameter, or with compatible heights. To do so, send us the original part number, the shaft and housing dimensions, and a photo of the part if possible. That way we offer you the most suitable option for your equipment.

To request a quote for the DBH 9586Pol seal or ask about a similar size, write to us on WhatsApp. At MR Accesorios Industriales we advise you so you find the correct seal. Send us the part number and dimensions, and we will reply promptly.