Radial shaft seal DBH 9559 — 60.00 x 80.00 x 14.00

DBH 9559 is a radial shaft seal reference, within Seals. Request a quote for 9559 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9559 radial shaft seal is a lip seal designed to block the passage of lubricant and prevent the ingress of contaminants in rotating equipment. Its dimensions of 60 mm shaft, 80 mm housing and 14 mm height make it suitable for assemblies requiring a reliable barrier against dust, water and particles. It is used in pumps, electric motors, gearboxes and other assemblies where the shaft rotates inside a cavity. MR Accesorios Industriales carries this brand and advises you so you can choose the right oil seal for your application.

This item is a DBH brand radial shaft seal, identified by part number 9559. Its dimensions are 60 mm shaft diameter, 80 mm housing diameter and 14.00 mm height. The A 233 design corresponds to a specific construction that defines the lip profile and the type of casing. These values come from the manufacturer's technical data sheet and are the ones you must verify before installing. The oil seal is made with elastomer and a metal reinforcement that gives it rigidity and ensures the fit in the housing.

Typical applications for an oil seal of these dimensions include centrifugal pumps, electric motors, speed reducers, transmission shafts and continuous process equipment. In all cases, the function is to retain oil or grease inside the assembly and block the ingress of dirt, water or chips. It is also used in agricultural machinery, conveyors and hydraulic systems where the shaft rotates at moderate speeds and there is exposure to dusty or humid environments. The choice of lip material depends on the fluid and the working temperature.

For correct installation, verify that the shaft diameter is within the recommended tolerance and that the sliding surface has no burrs or marks. Lubricate the lip before inserting it and place the oil seal with a flat tool that rests on the outer edge, never on the lip. If the housing shows wear, consider using a taller oil seal or a repair sleeve. Peripheral speed and temperature are critical factors: ask us if your equipment operates outside the usual ranges.

If you need an equivalent oil seal or a nearby size, the most practical approach is to send us part number 9559 or the current dimensions (shaft, housing and height) along with a photo of the assembly. With that data we can look for alternatives in other brands or configurations within the same category. We can also advise you on the lip material (nitrile, viton, polyurethane) depending on the fluid and temperature. Do not hesitate to ask about variants with spring or double lip if your application requires it.

To request a quote for the DBH 9559 oil seal or any other size, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with replacement options. If you have questions about installation, we can also guide you. Remember that we work with more than 80 years of experience in the industry and that we carry official brands such as DBH.