DBH 9548 radial shaft seal — 43.66 x 65.05 x 12.7

DBH 9548 is a reference of radial shaft seal, within Seals. Request a quote for 9548 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9548 radial shaft seal is a lip seal designed to block the passage of lubricant and contaminants in rotating equipment. With dimensions of 43.66 mm shaft, 65.05 mm housing and 12.70 mm height, and an Mx design, it is mounted in crankcases, pumps and gearboxes where the shaft rotates on bearings or bushings. MR Accesorios Industriales carries this brand and advises you so you choose the correct seal for your application.

This item is a DBH 9548 radial shaft seal, identified by its numeric designation. Its main attributes are: shaft diameter 43.66 mm, housing diameter 65.05 mm and height 12.70 mm. The Mx design corresponds to a configuration with a sealing lip and metal body, suitable for retaining oil or grease on rotating shafts. These dimensions define the mounting interference and must match the housing and shaft of your equipment.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, drive shafts and continuous process equipment. In all cases, the seal prevents lubricant leaks and the entry of dust, water or particles that accelerate wear on bearings and gears. It is a relatively low-cost but critical part: its failure can contaminate the lubricant and damage much more expensive components.

For correct installation, check that the shaft has no burrs or marks and that the sealing surface is clean and lubricated. The seal must enter perpendicular to the housing, without blows that deform the lip. If the shaft shows wear, consider a seal with an auxiliary lip. Selection depends on speed, temperature and lubricant type; consult us if you have doubts about compatibility with your equipment.

If you need an equivalent, the most practical thing is to send us the code 9548 or the current dimensions of the seal you are replacing. We can also look for alternatives in other brands or configurations if the Mx design does not fit your application.

To request a quote for the DBH 9548 seal, send us the code on WhatsApp at MR Accesorios Industriales. We will reply with the compatible options for your equipment.