Radial shaft seal DBH 9515/85 — 32.00 x 45.00 x 7.00

DBH 9515/85 is a radial shaft seal reference, within Seals. Request a quote for 9515/85 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9515/85 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or particles that could damage bearings and gears. With dimensions of 32 mm shaft, 45 mm housing and 7 mm height, and an Lx design, it fits gearboxes, pumps and motors where axial space is limited. MR Accesorios Industriales carries this brand with more than 80 years of experience in the field.

This item is a radial shaft seal from the DBH line, identified with the code 9515/85. Its dimensions are 32.00 mm shaft diameter, 45.00 mm housing diameter and 7.00 mm height. The Lx design corresponds to a single sealing lip with spring, intended for rotating shafts with internal lubrication. The 9515/85 nomenclature follows the manufacturer's designation and should not be confused with other oil seals in the same series that vary in diameter.

Typical applications of this oil seal include gearboxes, centrifugal pumps, electric motors and power transmission equipment. In all cases, the oil seal is mounted on the shaft and inside a machined housing, and its elastomer lip makes contact with the shaft surface to retain oil or grease. It is commonly found in equipment where bearings must be protected from external contamination and lubrication must be maintained at the exact point.

For assembly, verify that the shaft has a suitable surface finish and that the housing is clean and free of burrs. The oil seal must enter perpendicular to the shaft, without blows that deform the lip. Before installing it, lubricate the lip with the same oil or grease used in the equipment. If the shaft shows wear, consider a nearby size or an oil seal with an auxiliary lip. The selection depends on speed, temperature and type of fluid, data that should be confirmed with the manufacturer's data sheet.

If you need an equivalent or a close size, you can send us the code 9515/85 or the dimensions of the original oil seal. We can also help you identify the part from a photo or the equipment drawing. We work with in-house manufacturing of EMMAR brand housings, chains and pulleys, which allows us to offer alternatives when the exact size is not in the standard line.

To request a quote for the DBH 9515/85 oil seal, send the code on WhatsApp to MR Accesorios Industriales. We reply with the purchasing options. If you have doubts about the application, our technical team can advise you so that you choose the correct seal and avoid premature failures in your equipment.