Radial shaft seal DBH 9480Pol — 40.00 x 60.00 x 10.00/11.50

DBH 9480Pol is a radial shaft seal reference, within Seals. Request a quote for 9480Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9480Pol radial shaft seal is a lip seal designed to stop the passage of lubricant and prevent the ingress of contaminants in rotating equipment. It mounts on a 40 mm shaft and fits a 60 mm housing, with a height of 10.00/11.50 mm and A 209 design. It is a wear part that is replaced during preventive maintenance of pumps, motors and gearboxes. MR Accesorios Industriales supplies it as part of its line of seals and shaft seals.

This item is a seal from the DBH brand, identified with the designation 9480Pol. Its main dimensions are: shaft diameter 40 mm, housing diameter 60 mm and height 10.00/11.50 mm. The A 209 design corresponds to a single-lip configuration with spring, suitable for retaining oil or grease under moderate rotation conditions. The dual height (10.00/11.50 mm) allows it to be adapted to housings with different mounting depths, as long as the nominal shaft and housing dimensions are respected.

Typical applications of this seal include centrifugal pumps, electric motors, gearboxes, reducers and power transmission equipment. In all cases, its function is to confine the lubricant inside the assembly and block dust, water or particles that could accelerate the wear of bearings and bushings. It is commonly found in industrial equipment where the shaft rotates at medium speeds and temperature conditions do not exceed the limits of the standard elastomer.

To correctly select and install a seal such as the 9480Pol, verify that the shaft diameter is within the recommended tolerance and that the contact surface has no scratches or wear. The housing must be clean, free of burrs and with the entry chamfer in good condition. During installation, lubricate the lip with the same oil used in the equipment and use a support tube to avoid damaging the seal. If the previous seal failed, also check the shaft play and the possible presence of internal pressure in the crankcase.

If you need a neighboring size or an equivalent from another brand, the most practical thing is to send us the full seal part number, the shaft, housing and height dimensions, and a photo of the part. With that data we can look for an alternative within the DBH line or other brands we supply. We can also advise you if the A 209 design is not suitable for your application and it is worth evaluating another type of lip or material.

To request a quote for the DBH 9480Pol seal or ask about a similar size, send us the part number on WhatsApp at MR Accesorios Industriales. We will reply with the replacement options that best suit your equipment. We work with more than 80 years of experience in the field, so if you have doubts about selection, installation or compatibility, write to us and we will help you resolve them.