Radial shaft seal DBH 9455 — 47.00 x 60.00 x 8.00

DBH 9455 is a radial shaft seal reference, within Seals. Request a quote for 9455 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9455 radial shaft seal is a lip seal that mounts in the housing and closes against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 47 mm shaft, 60 mm housing and 8.00 mm height place it in medium-sized transmission and rotating equipment. MR Accesorios Industriales supplies it as part of its line of seals and oil seals for maintenance and replacement.

This item is a seal from the DBH brand, identified with part number 9455. Its dimensions are 47 mm shaft diameter (d), 60 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a single-lip configuration with a spring, intended for rotating shafts with lubrication. The sealing lip works on the shaft and the outer diameter fits into the housing to prevent oil or grease from passing to the outside.

It is used in gearboxes, pumps, electric motors, rollers and transmission equipment where there is a shaft rotating inside a lubricated housing. It also appears in applications exposed to dust or splashes, where the seal prevents the contaminant from reaching the bearing or gear. It is a wear part: when the lip hardens, cuts or loses elasticity, lubricant leakage or dirt ingress begins to appear.

To install it, verify that the shaft has no burrs, deep scratches or wear in the contact area; a damaged shaft ruins the new lip within a few hours. Lubricate the lip with the same grease or oil used in the equipment before inserting it and place the seal perpendicular to the shaft, without hitting it from the side. If the housing has a groove or a shoulder, the seal must seat fully and remain firm. In the Lx design, the spring maintains lip pressure against the shaft.

If you need a nearby size or an equivalent, send us the full part number, the design type and the three dimensions: shaft diameter, housing diameter and height. With that data we can look for an alternative within the same category of radial shaft seals. If the original seal has no visible brand, send us a photo of the housing and the shaft with the dimensions taken with a caliper. The more precise the information, the faster we can offer you a compatible option.

To request a quote for the DBH 9455 oil seal, write to us on WhatsApp and send the part number 9455 along with the quantity you need. At MR Accesorios Industriales we handle replacement and maintenance inquiries with concrete technical data, no runaround. If you have doubts about installation or want to confirm that this size is the one that corresponds to your equipment, you can also ask us through that same channel.