DBH 9395 radial shaft seal — 27 x 47 x 10

DBH 9395 is a reference of radial shaft seal, within Seals. Request a quote for 9395 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9395 radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and power transmission equipment where a rotating shaft exits a housing. Its Lx design combines a sealing lip with a metal body that is press-fitted into the housing. MR Accesorios Industriales carries this brand and advises you on choosing the right size.

This item is a radial shaft seal from the DBH line, identified by the code 9395. Its dimensions are 27 mm shaft, 47 mm housing and 10 mm height. The Lx design corresponds to a seal with a single sealing lip and a metal outer body, designed for press-fit mounting in the housing. The 9395 nomenclature groups these standardized dimensions, so if you need to replace an old seal, always compare the three values: shaft diameter, housing diameter and width.

Typical applications for a 27 x 47 x 10 mm seal include small electric motors, centrifugal pumps, gearboxes, compressors and belt- or chain-driven transmission equipment. In all cases it performs the same function: preventing oil or grease from escaping where the shaft passes through and, at the same time, keeping contaminants from entering from outside. It is a wear part, so it should be checked when leaks or noise appear in the bearing area.

To install it correctly, check that the shaft has no burrs or wear and that the housing is clean and free of dents. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and apply force on the outer ring, never on the lip. If the shaft shows a deep groove, consider a seal with the lip in a different position. Selection depends on speed, temperature and the type of fluid; if you do not have that data, ask us and we will look at it together.

We can look for an equivalent. To do that, send us a photo of the old seal on WhatsApp, the code stamped on the body and the shaft, housing and height dimensions. With that data we will indicate the direct alternative in the same brand or in another line we carry. The more complete the information, the faster we can give you a useful answer.

MR Accesorios Industriales, since 1945, carries seals and oil seals from different brands. If you want a quote for the DBH 9395, write to us on WhatsApp with the code and dimensions. We will reply with the option that best suits your equipment.