DBH 9336 radial shaft seal — 9 x 24 x 7

DBH 9336 is a reference of radial shaft seal, within Seals. Request a quote for 9336 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9336 radial shaft seal is a lip seal that closes off the passage of oil or grease on rotating shafts and prevents the entry of dust, water or particles. It is press-fitted into the housing and runs on the shaft with a flexible lip. It is a wear part: when lubricant leakage or dirt ingress appears, it is replaced. MR Accesorios Industriales sells this brand and helps you confirm the size before quoting.

This item is a DBH 9336 radial shaft seal with the following dimensions: shaft diameter 9 mm, housing diameter 24 mm and height 7.00 mm. The indicated design is Lx, which corresponds to a single-lip seal with a metal case and sealing lip, without an additional dust lip. The designation 9336 identifies the exact combination of those three dimensions within the DBH line. If your shaft or your housing does not match these values, do not force it.

It is used in equipment where a small-diameter shaft rotates inside a compact housing: small electric motors, gearboxes, pumps, fans, machine tools, transmission equipment and mechanisms with oil or grease lubrication. It also appears in agro-industrial applications and in process equipment where the lubricant must be contained and, at the same time, the ingress of contaminants must be stopped. It is a critical part for the service life of the bearing next to it.

To install it, check that the shaft has no burrs or deep marks in the lip contact area, and that the housing is clean and free of deformation. The seal is inserted perpendicular, with a suitable tool, without striking the lip. Before fitting it, lubricate the lip with the same grease or oil used in the equipment. When selecting a replacement, in addition to the three dimensions, take into account the type of fluid, the operating temperature and the shaft speed.

If you need an equivalent, send us the part number 9336 together with the dimensions of your shaft, housing and height, and a photo or sketch of the assembly. With that data we review alternatives within the DBH line and other brands we sell. We can also advise you if the original seal has a dust lip or a configuration different from the Lx design.

MR Accesorios Industriales sells the DBH brand. To request a quote for the DBH 9336 oil seal, write to us on WhatsApp with the part number and the dimensions. We will reply with the corresponding reference and the quote conditions.