Radial shaft seal DBH 9283Vit — 42.00 x 53.00 x 7.00

DBH 9283Vit is a radial shaft seal reference, within Seals. Request a quote for 9283Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9283Vit radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 42 mm shaft, 53 mm housing and 7 mm height place it in medium-sized equipment. It is a wear part: when oil leakage or dirt ingress appears, it is replaced. MR Accesorios Industriales carries it as part of its seals and oil seals line.

This item is a DBH 9283Vit radial shaft seal, identified by its designation 9283Vit. Its published attributes are: shaft diameter 42 mm, housing diameter 53 mm and height 7.00 mm. The indicated design is Lx-R-H, which defines the lip and body configuration. It is a single-lip seal, intended for rotating shafts with lubrication. DBH is an official brand that MR carries, so the replacement is ordered with its exact code to avoid confusion with neighboring sizes.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, drive shafts and process equipment with 42 mm shafts. In all cases it serves two functions: keeping oil or grease inside the assembly and preventing contaminants from entering from outside. It is also used in equipment with water splash or fine dust, provided the lip material is compatible with the fluid and the working temperature.

For installation, check that the shaft is clean, free of burrs and marks, and that the sealing surface is not worn. The 42 mm dimension corresponds to the shaft and the 53 mm dimension to the housing; it is advisable to measure both before replacing. Lubricate the lip with the same oil used in the equipment before inserting it and place the seal perpendicular to the shaft, without striking the lip. If the housing has a shoulder or the shaft shows play, evaluate an alternative solution before mounting.

If you need an equivalent or a neighboring size, the most practical approach is to send the code 9283Vit along with the measurements taken on the equipment: shaft diameter, housing diameter and height. With that data, an alternative in the same family can be found or it can be confirmed whether the Lx-R-H design is the right one. If you do not have the code at hand, a photo of the old seal and the measurements help guide the search within the DBH line.

To request a quote for this DBH 9283Vit seal, send the code by WhatsApp to MR Accesorios Industriales. If the equipment is down, also indicate the shaft and housing measurements to speed up verification. MR carries this brand as part of its seals and oil seals line, and can guide you on the correct designation if the original code is not visible.