Radial shaft seal DBH 9280Pist — 58.00 x 63.50 x 9.50

DBH 9280Pist is a radial shaft seal reference, within Seals. Request a quote for 9280Pist via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9280Pist seal is a single-lip radial shaft seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions — 58 mm shaft diameter, 63.50 mm housing diameter and 9.50 mm height — place it in applications with limited space, where the seal must be mounted on a precision shaft and a machined housing. It is a wear part: when oil leakage, lip hardening or shaft wear appears, it should be replaced with one of the same designation and design.

The DBH 9280Pist is a radial shaft seal with the following dimensions: shaft diameter (d) 58 mm, housing diameter (D) 63.50 mm and height (h) 9.50 mm. It corresponds to design A 229, which defines the geometry of the lip and the metal case. These dimensions are the ones you need to verify before ordering: the seal fits by interference in the housing and its lip rests on the shaft. Any difference in shaft diameter or housing depth prevents correct mounting.

Typical applications for this type of seal are gearboxes, pumps, electric motors, transmission shafts and equipment with bearings lubricated with oil or grease. In all cases it performs two functions: retaining the lubricant inside the assembly and preventing the entry of dust, water or particles. Because of its 9.50 mm height it is used in shallow housings, where a wider seal does not fit. It is commonly found in equipment where the shaft rotates at moderate speeds and the working temperature is not extreme.

To select the replacement, always compare the three dimensions: shaft, housing and height. Design A 229 indicates the lip and case profile; if the original seal has a different geometry, it is advisable to confirm interchangeability. During mounting, lubricate the lip with the same grease or oil used in the equipment, check that the shaft has no burrs or marks and fit the seal perpendicular to the shaft, without striking it unevenly. A damaged lip or a scratched shaft causes leaks even if the dimensions are correct.

If you cannot find the exact size or need an equivalent, send us the code 9280Pist or the dimensions 58 x 63.50 x 9.50 mm on WhatsApp. At MR Accesorios Industriales we work with the DBH brand and can guide you toward a nearby size or an alternative design within the same radial shaft seal category. The more data you provide — dimensions, type of lubricant, temperature and rotation speed — the more accurate the proposal will be.

MR Accesorios Industriales sells the DBH brand and has more than 80 years of experience in the industry. If you need a quote for the 9280Pist seal or want to ask about another size, write to us on WhatsApp with the code and we will reply with the available technical information. We can also advise you on mounting and selection if you tell us which equipment it is installed in.