Radial shaft seal DBH 9241Pol — 58.00 x 74.00 x 8.00

DBH 9241Pol is a radial shaft seal reference, within Seals. Request a quote for 9241Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9241Pol radial shaft seal is a lip seal designed to close off the passage of oil or grease at the point where a shaft passes through a housing. With a 58 mm shaft diameter, 74 mm housing and 8 mm height, and A 145 design, it is press-fitted into crankcases, covers and housings to retain lubricant and stop dust or water from entering. It is a wear part that should be replaced when a leak appears or the equipment is taken apart.

The DBH 9241Pol is a radial lip seal with the following dimensions: shaft diameter 58 mm, housing diameter 74 mm and height 8.00 mm. It corresponds to the A 145 design, which defines the geometry of the lip and the metal body. These are the dimensions you must verify before ordering: the seal fits by interference in the housing and its lip rests on the rotating shaft. If the shaft is worn or the housing deformed, the seal will not close even if the size matches.

It is used in gearboxes, pumps, electric motors, transmission shafts and process equipment where the lubricant must be separated from the environment. It also appears in road and agricultural machinery and in production lines where dust or water is present. In all those cases it performs two functions: retaining the oil inside and preventing contaminants from entering toward the bearing or gear. It is an inexpensive part compared with the cost of a failure due to lack of lubrication.

To select it, in addition to the three dimensions, take into account the lip material, the type of fluid and the working temperature. The A 145 design indicates the shape of the lip and the spring. When installing it, lubricate the lip, seat the seal squarely and tap on the outer edge, never on the lip. Check that the shaft has no burr or groove in the contact area, because that accelerates leakage.

If you cannot find the 9241Pol or need a nearby size, send us the code, the shaft, housing and height dimensions, and a photo of the old seal. With that we look for the equivalent in the same brand or in another line we carry. MR Accesorios Industriales works with seals and oil seals for different applications, and advises you so that the size and material are correct.

To request a quote for the DBH 9241Pol seal, write to us on WhatsApp with the code and quantity. If you have doubts about the design or the lip material, ask us before buying: we help you confirm that it is the right one for your equipment. MR Accesorios Industriales carries this brand and can offer alternatives if you need another size or a seal with different characteristics.