Radial shaft seal DBH 9214 — 40.00 x 52.00 x 3.00/8.50

DBH 9214 is a radial shaft seal reference, within Seals. Request a quote for 9214 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9214 radial shaft seal is a lip seal mounted on the shaft that closes off the passage of lubricant or contaminants in gearboxes, pumps and motors. Its A 082 design combines a height of 3.00 mm at the lip with 8.50 mm at the body, which allows it to be housed in tight spaces without losing sealing performance. MR Accesorios Industriales carries this brand and advises you on choosing the right size.

This item is a seal from the DBH line, identified with the part number 9214. Its dimensions are 40.00 mm shaft diameter, 52.00 mm housing diameter and a height of 3.00/8.50 mm. The A 082 design corresponds to a single lip with a spring, intended for rotating shafts at moderate speeds. The lip elastomer and the metal body form a unit that press-fits into the housing and seals against the shaft.

It is used in gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment where oil or grease must be retained and the entry of dust or water prevented. It also appears in machine tools, conveyors and agro-industrial equipment. It is a wear part: when the lip hardens or becomes marked, it starts to leak and should be replaced before it damages the shaft or the bearing.

To install it, verify that the shaft is clean, free of burrs and grooves, and lubricate the lip with the same grease or oil used in the equipment. The housing must be straight and free of dents. If the shaft is worn, consider a neighboring size or a seal with an auxiliary lip. The working speed and temperature determine the choice of lip material; consult us if the equipment operates outside the usual ranges.

If you cannot find part number 9214 or need a different size, send us the shaft diameter, the housing diameter and the height, and we will look for the equivalent in DBH or another brand. We can also offer you a neighboring size if the original is not available. The more data you give us — a photo of the old part, the type of equipment, the working conditions — the faster we reach the right option.

To request a quote for this DBH 9214 oil seal, send the part number on WhatsApp to MR Accesorios Industriales. We will confirm alternatives with no obligation. If you handle recurring maintenance, we can build a list of seals by equipment so you have everything on hand. More than 80 years supporting Argentine industry with seals, bearings and power transmission.