
DBH 9207 radial shaft seal — 40 x 55 x 6.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 9207 is a reference of radial shaft seal, within Seals. Request a quote for 9207 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 9207 seal is a radial shaft seal with a 40.00 mm shaft diameter, 55.00 mm housing diameter and 6.50 mm height, with an Ms design. It is used to retain lubricant and exclude contaminants in rotating equipment, protecting bearings and guides. It is a wear part that should be replaced when oil leakage or dirt ingress appears.
This item is a DBH radial shaft seal, identified by the designation 9207. Its dimensions are 40.00 mm shaft diameter, 55.00 mm housing diameter and 6.50 mm height. The Ms design corresponds to a configuration with a sealing lip and spring, suitable for rotating shafts. DBH is a brand MR sells, so you can ask about compatible alternatives.
It is used in gearboxes, pumps, electric motors, transmission shafts and process equipment where oil or grease must be contained and dust, water or particles must be kept out. It also appears in applications with continuous or intermittent rotary motion, provided the operating speed and temperature are compatible with the lip material.
To install it, check that the shaft and housing are clean, free of burrs and marks. Lubricate the lip before inserting it and avoid hitting it: it is best to use a tube or spacer that presses on the outer ring. Selection depends on speed, temperature, lubricant type and differential pressure. If the shaft is worn, consider a seal with an additional lip.
To quote the code 9207 or the shaft, housing and height dimensions, send us. A photo of the part and the housing also helps. With that data we review alternatives within the DBH line and other brands we sell, and confirm the most suitable option for your equipment.
To request a quote for the DBH 9207 seal, write to us on WhatsApp at MR Accesorios Industriales with the code and quantity. We will reply with the technical information. MR Accesorios Industriales sells seals, bearings and power transmission.
Dimensions
- Shaft (d)
- 40mm
- Housing bore (D)
- 55mm
- Height (h)
- 6.50mm
- Design
- Ms
Frequently Asked Questions
- How do I know if I can replace it with a similar one?
- Compare shaft diameter, housing diameter and height. Also check the lip type, material and operating speed. If the shaft is worn, a seal with an additional lip may be better.
- Where can I ask about an equivalent size?
- Write to us on WhatsApp at MR Accesorios Industriales with the code 9207 or the dimensions of the old seal. We will advise you to find a compatible alternative within the brands we sell.
- What dimensions does the DBH 9207 seal have?
- The DBH 9207 seal has a 40.00 mm shaft diameter, 55.00 mm housing diameter and 6.50 mm height. These are the dimensions shown in its designation and are used to verify compatibility before installation.

