Radial shaft seal DBH 9198 — 20.00 x 35.80 x 8.70

DBH 9198 is a radial shaft seal reference, within Seals. Request a quote for 9198 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9198 radial shaft seal is a lip seal designed for rotating shafts: it keeps lubricant from escaping and stops dust, water or particles from getting in from outside. It is press-fitted into the housing and runs on the shaft with a flexible lip that maintains contact. It is a small but critical part: when it fails, oil loss and premature wear of bearings and gears begin. MR Accesorios Industriales carries this brand and helps you confirm the size before requesting a quote.

This DBH 9198 oil seal has a shaft diameter of 20 mm, a housing diameter of 35.80 mm and a height of 8.70 mm. Design A 119 refers to the construction geometry of the lip and the metal body. These are the three dimensions that determine whether or not it fits your housing: the shaft the lip runs on, the bore it is pressed into and the total width of the housing. If any of them does not match, do not force the installation.

It is used in gearboxes, pumps, electric motors, drive shafts and equipment with rotating motion where oil or grease must be retained. It also appears in older or imported machines where finding the original seal is difficult. In those cases, the important thing is to respect the shaft, housing and height dimensions, and to choose a lip design compatible with the speed and the type of lubricant.

To select it properly, check the condition of the shaft: if it has a groove or wear, the new lip will not seal even if the size is correct. The housing must be clean, free of burrs and with the exact diameter so the seal is press-fitted without deforming. Lubricate the lip before installing and tap evenly, never on the lip. If the equipment runs at high speed or temperature, let us know and we will take it into account when quoting.

If code 9198 is not the one you need, send us the dimensions of your old seal or a photo with a caliper next to it. With the shaft diameter, housing diameter and height we can look for a nearby size or an equivalent within the same brand or another one we carry. We can also check whether design A 119 is suitable for your application.

To order it, write to us on WhatsApp with code 9198 or with the dimensions. At MR Accesorios Industriales we will send you the quote. If you are unsure between two sizes, send both and we will help you determine which one corresponds to your equipment's housing and shaft.