DBH 9131 radial shaft seal — 24 x 52 x 10

DBH 9131 is a reference of radial shaft seal, within Seals. Request a quote for 9131 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9131 radial shaft seal is a lip seal that closes the passage of oil or grease between a rotating shaft and its housing. With a 24 mm shaft diameter, 52 mm housing diameter and 10 mm height, and Lx design, it is used in gearboxes, pumps, electric motors and power transmission equipment to retain lubricant and stop the ingress of dust or water. MR Accesorios Industriales carries this brand and advises you on choosing the right seal.

The DBH 9131 is a lip seal with the dimensions indicated in its designation: 24.00 mm shaft diameter (d), 52.00 mm housing diameter (D) and 10.00 mm height (h). The Lx design corresponds to a seal with a sealing lip and metal body, designed to be press-fitted into the housing and run on a rotating shaft. These are the dimensions you must verify against the shaft and the bore before ordering it.

Typical applications for a seal of this size include gearboxes, reducers, centrifugal pumps, electric motors, transmission shafts and process equipment. In all cases it serves to retain lubricant inside the assembly and prevent contaminants such as dust, chips or water from entering, extending the life of bearings and gears. It is a wear part that should be replaced when a visible leak or noticeable axial play appears.

To select it correctly, check that the shaft diameter is within the recommended tolerance for radial shaft seals, that the housing has no burrs and that the shaft surface shows no scoring or wear. The lip must be lubricated before assembly and the part is inserted perpendicular to the shaft, without striking the lip. If the equipment runs at high speed or elevated temperatures, ask us about the lip material and spring type.

To quote part number 9131, send us the dimensions of the old seal: shaft diameter, housing diameter and height. With that data we look for the equivalent in DBH or another brand we carry. We can also guide you if the housing has a shoulder or if the original seal has a special configuration, such as a double lip or a lip with dust guard.

To request a quote for the DBH 9131 seal, write to us on WhatsApp with the part number and the quantity you need. At MR Accesorios Industriales we work with brands and we reply promptly with the alternatives that best suit your equipment. If you have doubts about installation, we can also advise you so the repair goes right the first time.