Radial shaft seal DBH 9049 — 17.00 x 25.00 x 7.00

DBH 9049 is a radial shaft seal reference, within Seals. Request a quote for 9049 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9049 radial shaft seal is a lip seal that closes off the passage of oil or grease on rotating shafts while also preventing dust and water from entering from the outside. Because of its dimensions of 17 mm shaft, 25 mm housing and 7 mm height, it is used in compact equipment where space is limited. Its Lx design combines a sealing lip with a metal body that is press-fitted into the housing.

This DBH 9049 oil seal has a 17.00 mm shaft diameter, a 25.00 mm housing diameter and a 7.00 mm height. The Lx design indicates a construction with a sealing lip and metal reinforcement, suitable for press-fit mounting in the housing. The 9049 designation identifies the exact size within the DBH line, and the part number stays the same so you can order the same seal when replacing a worn one.

Seals of this size appear in small electric motors, centrifugal pumps, gear reducers, transmission boxes and power transmission equipment. They are also used in machine tools, compressors and hydraulic systems where the shaft rotates inside a fixed housing. In every case they serve to retain the lubricant and protect the bearings or bushings from external contamination.

To choose a seal correctly, check that the shaft diameter, the housing diameter and the height match the dimensions of the original part. Check the condition of the shaft surface: if it has burrs, scratches or wear, the lip will not seal properly and the shaft should be repaired or replaced. During installation, lubricate the lip with the same oil or grease used in the equipment, insert it perpendicular to the housing and tap it with a tube resting on the outer edge, never on the lip.

If you cannot find part number 9049 or you need a nearby size, send us the shaft diameter, the housing diameter and the height you measured. With that data we look for the equivalent within the DBH lines we carry or offer you the closest alternative. We can also advise you if the seal is mounted on a worn shaft or if you need a version with a double lip or special material.

To request a quote for the DBH 9049 oil seal, send the part number by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or the design, attach a photo of the old part or the shaft and housing dimensions. That way we confirm the exact reference and send you the quote without delay.