Radial shaft seal DBH 9043 — 14.00 x 24.05 x 8.50

DBH 9043 is a radial shaft seal reference, within Seals. Request a quote for 9043 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9043 radial shaft seal is a lip seal that blocks the passage of oil, grease or water between a rotating shaft and its housing. With a 14 mm shaft diameter, 24.05 mm housing diameter and 8.50 mm height, and Lx design, it is press-fitted into the housing and runs against the shaft. It is a wear part: when leakage appears, it is replaced. MR Accesorios Industriales supplies it as an official brand.

This item is a radial shaft seal from the DBH line, identified by part number 9043. Its dimensions are 14.00 mm shaft diameter (d), 24.05 mm housing diameter (D) and 8.50 mm height (h). The indicated design is Lx, which defines the geometry of the lip and the metal case. It is a single-lip radial seal, designed for rotating shafts with lubrication and to retain the lubricant inside the assembly. Before installing it, check that the three dimensions match the housing and shaft of your equipment.

Typical applications for a seal of this size appear in small gearboxes, electric motors, pumps, compressors, fans and power transmission equipment where a shaft rotates inside a lubricated housing. It is also used in agricultural machinery mechanisms, conveyor lines and process equipment. In all cases it performs the same function: preventing outward leakage and stopping the ingress of dust, water or particles that contaminate the lubricant and wear the bearings.

To select and install a seal, check the condition of the shaft: if the lip has run for a long time on the same track, consider a new shaft or a wear sleeve. The housing must be clean, free of burrs and with the correct diameter. When fitting it, lubricate the lip, press perpendicularly and without striking the seal, and check that it seats fully. If the previous seal failed, also check the operating temperature, internal pressure and shaft alignment.

If you need an equivalent or a nearby size, send us part number 9043 together with the dimensions of your shaft and housing, or directly the drawing or photo of the old part. With that we search the DBH line and compatible alternatives. If the Lx design is not the one for your application, we can also advise you on other lip and case variants. The more data you provide, the faster we reach the correct part.

To request a quote for the DBH 9043 seal or ask about a nearby size, write to us on WhatsApp at MR Accesorios Industriales with the part number and dimensions. We will reply with the available alternative and the options in the seals and oil seals category.