DBH 9032 radial shaft seal — 10 x 20 x 7

DBH 9032 is a reference of radial shaft seal, within Seals. Request a quote for 9032 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9032 radial shaft seal is a lip seal that mounts on the shaft and closes against the housing to retain lubricant and block the ingress of dust, water or particles. With dimensions of 10 mm shaft, 20 mm housing and 7 mm height, and Lx design, it is used in pumps, electric motors, gear reducer boxes and power transmission equipment. MR Accesorios Industriales carries it as part of its line of seals and oil seals for maintenance and replacement.

This item is a DBH 9032 radial shaft seal, identified by its designation 9032. Its dimensions are 10 mm shaft diameter (d), 20 mm housing bore (D) and 7 mm height (h). The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with lubrication. The DBH brand is a brand that MR carries, so the product conforms to the manufacturer's data sheet and is confirmed against it before quoting.

Typical applications for a seal of this size include small centrifugal pumps, low-power electric motors, reducers, compressors, machine tools and power transmission equipment. In all cases, the seal's function is to retain oil or grease inside the assembly and prevent contaminants from entering from outside. It is a wear part that is replaced during preventive maintenance or when a visible leak appears.

To install a radial shaft seal, it is advisable to verify that the shaft and housing are clean, free of burrs or marks, and to lubricate the lip before inserting it. Selection depends on rotation speed, working temperature and the type of lubricant; if the equipment operates with high vibration or misalignment, a different design may be required. The Lx design is suitable for general applications with a rotating shaft and continuous lubrication.

If you need an oil seal equivalent to the DBH 9032, the most practical approach is to send the part number 9032 or the dimensions 10 x 20 x 7 mm via WhatsApp. With that data, an alternative from the same brand or from another firm that MR carries can be found, always respecting the shaft, housing and height dimensions. Variants with a different lip type or material can also be inquired about depending on the application.

To request a quote for the DBH 9032 oil seal or any of the seals and oil seals that MR Accesorios Industriales carries, send the part number via WhatsApp. A technical advisor will respond with the quote and the alternatives that best fit your equipment.