Radial shaft seal DBH 9015 — 145.00 x 180.00 x 15.00

DBH 9015 is a radial shaft seal reference, within Seals. Request a quote for 9015 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9015 radial shaft seal is a lip seal mounted on the shaft and inside the housing to retain lubricant and block the ingress of dust, water or particles. Its Lx design combines a sealing lip with a dust lip, making it suitable for equipment exposed to moderate contamination. It is used in gearboxes, pumps, electric motors and process machinery, where the shaft rotates continuously and sealing is critical to bearing service life.

This item is a DBH brand radial shaft seal, identified by the code 9015. Its dimensions are shaft 145 mm, housing 180 mm and height 15.00 mm. The Lx design indicates it has a primary sealing lip and a secondary exclusion lip, mounted on a metal case that is press-fitted into the housing. The lip elastomer is formulated to resist industrial oils and greases, and the internal spring maintains contact pressure on the shaft.

Typical applications for this seal include gearboxes, speed reducers, centrifugal pumps, large electric motors and transmission equipment. In all these cases, the seal prevents lubricant leaks and protects the bearings from contaminant ingress. It is a wear part that should be replaced when dripping appears, abnormal axial play is detected, or the lip shows hardening or visible cuts.

For correct installation, check that the shaft has the proper hardness and surface finish, free of burrs or marks. Lubricate the lip with the same grease or oil used in the equipment before sliding it onto the shaft. The seal must enter perpendicular to the housing, without direct blows to the elastomer; use a tube or spacer that rests on the metal edge. The 15.00 mm height defines the required space in the housing, and the 180 mm diameter corresponds to a light interference fit.

If you need a nearby size or an equivalent from another brand, provide the code 9015 and the shaft, housing and height dimensions. We can also advise you if the Lx design does not suit your application and a single-lip seal or alternative material should be considered. At MR Accesorios Industriales we can quote nearby sizes within the same series.

To request a quote for this DBH 9015 seal, send the code via WhatsApp to MR Accesorios Industriales. If you have doubts about the designation or need help identifying the replacement, attach a photo of the used part and the shaft and housing dimensions. Our technical team will reply with the most suitable option for your equipment.